Milking parlour either side of road.

Location
Wales
This is going to sound completely nuts, but I'm trying to figure out how to avoid crossing road with milkers. Its a new site so can put a parlour anywhere and thinking I could build two parlours one either side of road. One side would have parlour and bulk tank and the other just a parlour and pump. Would it be feasible if we had a culvert under road to run a milkline to opposite side into bulk tank?
 
Location
Wales
Screenshot_20200208-231525_Samsung Internet.jpg
 
Location
Wales
Underpass a possibility but would have to re-route stream going under road so probably a very very expensive job. I guess a second parlour even without bulk tank will be expensive too, hey ho what to do ?
 

Bipper

Member
2 parlours seems massive overkill for 200 cows, surely just crossing the road would save a huge amount on labour.

Either underpass or grids, how major a road is it? If yo can’t cross it with cows they aren’t going to be keen on you digging it up either.

Might be cheaper to bore a pipe through and buy/rent a bail fir when you absolutely have to milk on the far side.
 
Location
Wales
Its a minor back road and I guess crossing would be easiest option. Just worried about the odd nutter that hurtles along it. Few weeks ago a nutter crashed into contractors spreader as he was turning in and tilped it over.
 

yin ewe

Member
Livestock Farmer
Location
Co Antrim
Definitely underpass, spoke to someone who put one in 3 years ago, reckons it was the best money he's ever spent. Used to take 3 people and 2 vehicles to stop the traffic and get the cows across the road 7 days a week. Says it's great to be able to dander out and bring them in on his own.
 

Pennine Ploughing

Member
Mixed Farmer
Ok ok I know it's a bad idea and it would never work but,,,,,,,,

How about building a milking parlour on a widened purposes built chassis and about as long as you need it, I know it would be a fair old width and length to shift it, but if wheels were mounted at the back corners, and a hydraulic drawbar on front to tip it up as it were to give a meter of clearance at pivot point it would not really bottom out on the ground,
Now build a shed each side of the road complete with collecting yard and milking pit, (the mobile parlour would have no pit just an open hole, feed a big duct with water, electric and milk line it to a central tank room by side of road, ) feed bin at each shed with auger to back of pit, and on parlour trailer have auger up each side to feeders, with a small hopper at the back fed by bin auger on limit switch,
All water and milk conections in pit, and electric conections from above,

If trailer to carry the parlour was going to be to big to move depending on what size you want it, then make each side on separate trailers,
Disconnect electric, water and milk line, and hook up to tractor and move to other side of road,
The trailer would sit on the concrete, and pit would be part of building floor,

Only need to buy 1 parlour that way, yet it is movable from site to site,, and parlour building in winter not used, cold be used as a shed for winter months,


Will it work ?, don't know, but if at later date you wanted a proper parlour, it could be hired out or sold
 

delilah

Member
Ok ok I know it's a bad idea and it would never work but,,,,,,,,

How about building a milking parlour on a widened purposes built chassis and about as long as you need it, I know it would be a fair old width and length to shift it, but if wheels were mounted at the back corners, and a hydraulic drawbar on front to tip it up as it were to give a meter of clearance at pivot point it would not really bottom out on the ground,
Now build a shed each side of the road complete with collecting yard and milking pit, (the mobile parlour would have no pit just an open hole, feed a big duct with water, electric and milk line it to a central tank room by side of road, ) feed bin at each shed with auger to back of pit, and on parlour trailer have auger up each side to feeders, with a small hopper at the back fed by bin auger on limit switch,
All water and milk conections in pit, and electric conections from above,

If trailer to carry the parlour was going to be to big to move depending on what size you want it, then make each side on separate trailers,
Disconnect electric, water and milk line, and hook up to tractor and move to other side of road,
The trailer would sit on the concrete, and pit would be part of building floor,

Only need to buy 1 parlour that way, yet it is movable from site to site,, and parlour building in winter not used, cold be used as a shed for winter months,


Will it work ?, don't know, but if at later date you wanted a proper parlour, it could be hired out or sold

isn't there some guys in Dorset do this, a milking bail for the 21stcentury they take around the farm following the cows ?
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 102 41.5%
  • Up to 25%

    Votes: 90 36.6%
  • 25-50%

    Votes: 36 14.6%
  • 50-75%

    Votes: 5 2.0%
  • 75-100%

    Votes: 3 1.2%
  • 100% I’ve had enough of farming!

    Votes: 10 4.1%

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

  • 864
  • 13
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, May 21 · 10am - 2pm GMT+1

Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
Top