Missing presumed stolen

[Howard150]

Na
Swapped for a bit of plugin
Semed a good idea at the time
Engine starts but has a big end type knok
Have new crank I got at cheffiins harrogate sale about 10 years ago .with that and an engine kit off agriline for 155 that should sort it
Agrline tinwork is not that dear
Have front axle bits on shelf
So throw a bit (lot) of time at it....might get me money back


As for them pillocks from Yorkshire wanting to be friends on arsebook...there should be a feck off button
Whoever christend Dave Howard 150 got it absolutely bang on

Kinnell, Surely we didn't go through this lot for nowt did we? Don't know whatever you mean pillocks from Yorkshire?

Got to have something to do now I'm out of hospital
Hope that does not mean you are going to stop coming ower't brew.

As for the name, well surely thats exactly what Howard 150 was designed for!
As far as wanting to be friends on Facebook, I may be wrong but I think the wanting was from West to East and not t'other way round! As in all things, I can of course be corrected.
As at all times, the biter can be bit!

You going to Donald Walkers on the 29th? or is it better not to ask

 

[massey765]

Anyway i lived in Yorkshire all my life its just that Lancashire came in one night and pinched it......I haven't moved.....Will still be comming owert brew but not sure about Donalds yet
Into 3 page now on here .....confidence is all shot

 

[Nearly]

Anyway i lived in Yorkshire all my life its just that Lancashire came in one night and pinched it......I haven't moved.....Will still be comming owert brew but not sure about Donalds yet
Into 3 page now on here .....confidence is all shot

If I remember, Yorkshire didn't put up much of a fight to keep you?

 

[Howard150]

Anyway i lived in Yorkshire all my life its just that Lancashire came in one night and pinched it......I haven't moved.....Will still be comming owert brew but not sure about Donalds yet
Into 3 page now on here .....confidence is all shot

Hope it's nothing I did?

 

[massey765]

Nay nay.......just the powers that be trying to keep there selves in work

Mid seventies if memory serves me

 

[Dealer]

Lookin at recent statement from your Yorkshire constabulary

Is there truth in the theory all this is a terrorist plot disguised as a ploowin plot.

 

[Howard150]

Lookin at recent statement from your Yorkshire constabulary

Is there truth in the theory all this is a terrorist plot disguised as a ploowin plot.

Judged a lot of plots over the years. Terrorist plot puts a whole new slant on it.
........... having said that then it is a fair way of describing some of them!

 

[Pennine Ploughing]

@massey765 did you get the raised flower beds finished in the garden, you got enough soil to finish ?

 

[massey765]

Page bleddy 4 for christs sake


'

 

[Pennine Ploughing]

this could run longer than the "moving a dead horse thread"

 

[Howard150]

this could run longer than the "moving a dead horse thread"

Specially now you let slip about the raised beds!

 

[massey765]

Has somebody pinched a few posts. ..was sure I got to page four this morning. ..might be the very same guy who took the half furrow......or on both occasions me goin senile

 

[Dealer]

lookin at the ploowin I did not think you ownd any posts

 

[Pennine Ploughing]

no missing furrows today,
he must of got enough soil for the raised beds now

 

[Howard150]

View attachment 474212

no missing furrows today,
he must of got enough soil for the raised beds now

Looks like somebody pinched his first and index fingers below the knuckle. Might have been a good thing really otherwise a very rude gesture could have occurred. Bit like going up to him to be helpful and saying 'can I have a word' an' im sayin' back 'tha can have two and the second one's off!'

Pity about the big stone in the crown though but then again it looks like you found your hat. Mebbees if you lifted the peak up a bit - or even turned it round to the back - you would have gone a teeny bit straighter. None ower bad once you got goin' though!

 

[Pennine Ploughing]

this might be a good way to not have a missing furrow, would it be allowed ?

could have a reverse one for the finish

 

[Cordiale]

View attachment 474212

no missing furrows today,
he must of got enough soil for the raised beds now

Correct me if I'm wrong. But looking at the above picture it seems to me there are 5 furrows on either side of the start, how can you do that with a 2 furrow plough?

 

[Cordiale]

Sorry guys just worked it out the post is not on the centre line but one furrow over. Just cant get the judges!!!

 

[Howard150]

Sorry guys just worked it out the post is not on the centre line but one furrow over. Just cant get the judges!!!

Peg stuck in between wrong forrows but any engineer worth his salt ploughs with a two furrow that will also plough a single furrow. Easy when you know how, even easier with a trailer plough!

 

[Howard150]

this might be a good way to not have a missing furrow, would it be allowed ?

could have a reverse one for the finish

Unfortunately falls just outside the rules .......'skimmers must be used'!