Mounted or trailed

Gedd

Member
Livestock Farmer
Looking at straw bedding machine's for bedding cattle this winter will be 2nd hand can't decide between 3 point linkage or trailed for and against please
 

Ormond

Member
We have a trailed kuhn.....very good machine.....tried a teagle mounted a few years ago..found it heavy....if you're dropping it off and on quite a bit.....go trailed
 

goodevans

Member
Only 1 tractor on site here and so a mounted kv ,cant fault it on a t6 145 but have got spread a bales as well and I think they are a better machine
 

An Gof

Member
Location
Cornwall
I set out to buy a mounted Lucas machine. After a demo I ended up with a trailed McHale. I’m SO glad I chose a trailer machine in the end, in my view there is simply no contest I’d have a trailer every time.
 

mo!

Member
Mixed Farmer
Location
York
We have a mounted teagle. It suits us as we have to reverse into some of our sheds over the muck. We have it on an old 3125 with a set of weights, it does blow well on 1000 shaft... A trailed machine would have higher sides so we would have less straw bubbling over.
 

HarryB97

Member
Mixed Farmer
Bought a mounted teagle a few years ago have it on the back of a T6080 with a loader and auger bucket on the front. Has to be on a larger tractor as they are very heavy when full. Equally as quick and easy to drop on and off I dont no why people think linkage kit is challenging. A lot more manouverable. Smaller loading area than a trailed so have to watch bale size and how much is left in it before loading. Trailed can come with two rotors for more through put and shorter chop length. Our shed has a central feed passage and due to the layout I cant turn round at one end so have to back down half the time so mounted is essential, helpful when filling up the auger bucket two. Also no punctures on a mounted!
 

An Gof

Member
Location
Cornwall
Bought a mounted teagle a few years ago have it on the back of a T6080 with a loader and auger bucket on the front. Has to be on a larger tractor as they are very heavy when full. Equally as quick and easy to drop on and off I dont no why people think linkage kit is challenging. A lot more manouverable. Smaller loading area than a trailed so have to watch bale size and how much is left in it before loading. Trailed can come with two rotors for more through put and shorter chop length. Our shed has a central feed passage and due to the layout I cant turn round at one end so have to back down half the time so mounted is essential, helpful when filling up the auger bucket two. Also no punctures on a mounted!

Your tractor still on iron wheels? :LOL::LOL::D:LOL::LOL:
 

Dog Bowl

Member
Mixed Farmer
Location
Cotswolds
Kuhn primor trailed here. Wouldn't even consider a mounted. It's even easy to reverse down dead end passageways so in my mind why would you even want a mounted?!
 

biggles

Member
Location
derbyshire
I have a mounted teagle 5050? I would like to go trailed purely to be able to get it onto the little tractor instead of shitting up the big one, also like the possibility of feeding baled silage through it. Would 60hp be ok on a tailed machine? not in a rush so can go steady.
 

daithi

Member
I have a mounted teagle 5050? I would like to go trailed purely to be able to get it onto the little tractor instead of shitting up the big one, also like the possibility of feeding baled silage through it. Would 60hp be ok on a tailed machine? not in a rush so can go steady.
I put silage through a 4040 no problem.
 

biggles

Member
Location
derbyshire
I put silage through a 4040 no problem.
I have done the same in the past, but cant unless its on the big tractor with weights too. our yard has steep and rough bit and it worries me when the front wheels start lifting. just thought a trailed one with a swivel spout would help filling some of the mangers up and I could get under the low sheds with the little tractor, cheers
 

daithi

Member
I have done the same in the past, but cant unless its on the big tractor with weights too. our yard has steep and rough bit and it worries me when the front wheels start lifting. just thought a trailed one with a swivel spout would help filling some of the mangers up and I could get under the low sheds with the little tractor, cheers
Teagle used to advertise a wheel kit for the 4040/5050, a bit like caster wheels for smaller tractors
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,292
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top