Mtx140 load sensing hydraulics

[Sean Deere]

I need to work fusion on a mc cormick mtx 140, currently I have no load sensing hydraulic. Can someone describe exactly what I need to fit regarding valve block and sensing line.
I have a big return for oil on the rhs.
It s a 2002 , withered the side slices. Ideally a photo would be ideal.

 

[sc4545]

can you put up a picture of the spool block

 

[Sean Deere]

 

[Sean Deere]

I have a large return line to the left hand side of this valve block

 

[sc4545]

On the 2nd slice on the block on the left hand side of it there are 2 bungs the back one is the ls port and the one just behind it is the pressure port?

 

[Sean Deere]

Thanks What do I fit to them, what fits to port
What fits to pressure port .
Some one told me a need a valve and a non return valve ?

 

[sc4545]

They are 22mm and 18 mm fittings. You can put a non return valve on the ls line

 

[Sean Deere]

Thanks ,
I see the blanks , there are 3 , but I see the ones your on about , it's like someone put in different one .
So what do I screw into each one , do I screw in a quick release female fitting.
Do I remove front quick release from that block

 

[sc4545]

you can use that quick release in the front as a return either. we have a 3/8 quick release in the sensing line and a normal 1/2 one in the pressure one

 

[v8willy]

Few pics

Feed line with the solid Q/R & sensing line done with a hose (finger)

From the top

Best I can get of the conections, none too clean as sowing fert in dusty rain & they don't get used much, was the same setup on MX135 only both fittings were solid rather than hose, but it was the baling tractor, this was only ever a spare.

 

[Sean Deere]

Thanks for them. I now know exactly what I ve got to do. Hopefully all goes well and l 'll be bailing in a few weeks. Farming is a great pass time ?

 

[davidroberts30]

on my 5140 i just changed the end plate of the spools to 1 with fittings in

 

[davidroberts30]

on my 5140 i just changed the end plate of the spools to 1 with fittings in

 

[Sean Deere]

Did you run a fusion with a 5140, what is the advantage of having a non return valve on the load sensing line.

 

[davidroberts30]

Did you run a fusion with a 5140, what is the advantage of having a non return valve on the load sensing line.

Forage wagon I used
I dont have a non return?‍

 

[Sean Deere]

Few pics

Feed line with the solid Q/R & sensing line done with a hose (finger)

From the top

Best I can get of the conections, none too clean as sowing fert in dusty rain & they don't get used much, was the same setup on MX135 only both fittings were solid rather than hose, but it was the baling tractor, this was only ever a spare.

Few pics

Feed line with the solid Q/R & sensing line done with a hose (finger)

From the top

Best I can get of the conections, none too clean as sowing fert in dusty rain & they don't get used much, was the same setup on MX135 only both fittings were solid rather than hose, but it was the baling tractor, this was only ever a spare.

Hi v 8 , just got fusion today, garage very busy, was waiting ages for it .
Silly question, with the 3/8 line , does the oil from tractor feed out into the baler from sign port ( ie, oil pressure is fed out into baler, I may have turned valve incorrtectly. Do I even need this check valve

 

[sc4545]

you have the check valve the wrong way round. the oil comes from the baler back to the tractor.

 

[Sean Deere]

you have the check valve the wrong way round. the oil comes from the baler back to the tractor.

Thanks for that , I ll give it a go tonight