MX Manubal V40

[Gormers]

Can this grab pick up 2 rounds?
Also with the tine kit are they ok handling quadrants?
Any user reviews appreciated
Tia

 

[Beefsmith]

Can this grab pick up 2 rounds?
Also with the tine kit are they ok handling quadrants?
Any user reviews appreciated
Tia

We run one and have used it with many different sizes. You can make it work.

 

[Gormers]

Are they well built @Beefsmith

 

[Jim75]

They work quite well with hesstons as can use the grab to hold on to them. Can lift 2 x 4x4x8 hesstons

 

[GFA]

Have had a v500 for 2 years shifting over 3000 hestons a year and not had a problem with it. Shift the pin in the ram and you can lift two rounds on there can.

 

[Gormers]

Anyone know of a muck grab that you can use on bales?
3 big bales / 4 rounds etc
Thanks

 

[Sid]

Can this grab pick up 2 rounds?
Also with the tine kit are they ok handling quadrants?
Any user reviews appreciated
Tia

Yes just like this, bottom 2 lift top time holds in place.
All hay and straw is moved and stacked with V40

Unload lorries with tine kit, easily.

Soft bale kit, is usable but not perfect.

Ours had bit of welding under warranty but nothing major.

 

[DieselRob]

Anyone know of a muck grab that you can use on bales?
3 big bales / 4 rounds etc
Thanks

I've always found muck grabs to have too many tines to try stab in to a bale successfully, even rotten bales that you can't pick up with the twin spike

 

[Gormers]

Was thinking of taking some tines out when needed for bales
I’m more concerned about the top grab not crowding far enough back & stopping the top two rounds @DieselRob
Grab tines probably too long

 

[DrDunc]

Anyone know of a muck grab that you can use on bales?
3 big bales / 4 rounds etc
Thanks

Cherry products with kv tines

I've a gs76 on the tractor loader

Been putting on, and taking off 4 at a time for years