Mxm 155

[Jabk]

I was working at a mxm that won't lift the front suspension it's always down permanent and when in calibration mode brings up u 07

 

[Mur Huwcun]

Nearly sure that it’s a dealer laptop job to sort that. Don’t use it too much with suspension right down as axle casing will wear through bottom hose

 

[Jabk]

I thought you could get away with out a laptop on them ones I take it two of the solenoid needs power at once to operate

 

[2wheels]

there is a wee filter in the system, somewhere , i can't remember exactly but a parts diagram should show. if it collapses as the one in our 140 did you get those symptoms.

 

[Jabk]

there is a wee filter in the system, somewhere , i can't remember exactly but a parts diagram should show. if it collapses as the one in our 140 did you get those symptoms.

 

[Jabk]

I was wondering have I got a electrical issue

 

[2wheels]

quite possibly electrical, these tractors are getting on in years now.

 

[Jabk]

quite possibly electrical, these tractors are getting on in years now.

 

[Jabk]

I think there has to be three solenoid live for her to lift

 

[YELROM]

We bought a New Holland TM155 with front suspension that didn't work
When i checked it all one of the cables most of been pulled on something and a wire in a plug was pulled back a little bit and not making a connection
Might be worth checking

 

[wdah/him]

say whats wrong now, funny this should come up a si may just know a relatively new owner of a 07 mxm 140, how good is the front axle suspension, this is a pro model if that mean anything, know nothing about them as yet but it seems ok will know more in a few weeks

 

[2wheels]

say whats wrong now, funny this should come up a si may just know a relatively new owner of a 07 mxm 140, how good is the front axle suspension, this is a pro model if that mean anything, know nothing about them as yet but it seems ok will know more in a few weeks

ok when it is working.

 

[Jabk]

I'm nearly sure all wires are ok I don't seem to have any power to any valves at the suspension bank

 

[wdah/him]

ok when it is working.

3 weeks to I drive it again. Man said he finds it very stiff in them. Never sees much movement. So wondering if there is a setting soften it

 

[cosmagedon]

Error Code U07 -Suspension Is Stationary During The Raise Command In The Auto
Calibration Procedure

Could be a few things but start at the beginning with the raise solenoid, see if its getting power. Its been a while since I've worked on one of those valves but they are a very poor design, the oil very rarely gets circulated so whatever is in the system ends up staying there and when the brass filter breaks down it just works it's way around the valve block and clogs everything up.

 

[Jabk]

I don't have power is my problem I think if I split the plugs to test does that upset electrical system

 

[2wheels]

Error Code U07 -Suspension Is Stationary During The Raise Command In The Auto
Calibration Procedure

Could be a few things but start at the beginning with the raise solenoid, see if its getting power. Its been a while since I've worked on one of those valves but they are a very poor design, the oil very rarely gets circulated so whatever is in the system ends up staying there and when the brass filter breaks down it just works it's way around the valve block and clogs everything up.

remind where the brass filter is, i saw our one changed years ago but old age has overtaken me.

 

[alextm165]

I was working at a mxm that won't lift the front suspension it's always down permanent and when in calibration mode brings up u 07

hi did you ever figure out what was wrong