Need help for JCB Telehandler fault codes.
- Thread starter waqas712
- Start date
- Location
- DD9.
Google jcb fault codes. It will take you to jcb site where you type in codes
Thanks for ur reply,
The website show the below details but how to solve it.
CODE DESCRIPTION
Fault which is set when no MDP updates occur on Injector 3 due to environmental conditions (as defined by the update strategy)
- Location
- DD9.
- Location
- DD9.
On a jcb........try wiggling wires and do all the plugs with elec cleaner before trying anything more invasive be my advice.
think there’s some computer boxes under the boom with big snap plugs, they’ve given me some weird and wonderful problems before.
Also had loom behind dash rubbing on chassis because cab mount burst. That gave some fancy codes.
think there’s some computer boxes under the boom with big snap plugs, they’ve given me some weird and wonderful problems before.
Also had loom behind dash rubbing on chassis because cab mount burst. That gave some fancy codes.
ACEngineering
Member
- Location
- Oxon
no expert but i would say injector fault or needs recoding?
- Location
- DD9.
you’re more of an expert than me, I just wiggle plugs and wires then phone someone else if that doesn’t work
ACEngineering
Member
- Location
- Oxon
you’re more of an expert than me, I just wiggle plugs and wires then phone someone else if that doesn’t work
Not on a jcb I'm not.
Combine Rescue
Member
Check plugs and sockets in engine controller. Often problem is the water fallow the loom and sits inside, in result gives you corrosion. Depending how bad it is can be fix.
Scholsey
Member
- Location
- Herefordshire
Anyone know what this fault code means.......
Not ideal
Timbo
Member
- Location
- Gods County
Oil cooler ?
Scholsey
Member
- Location
- Herefordshire
looking like it, she’s gone in for surgery.
Hi Omar:
We couldn't solve it yet, even our local dealer also doesn’t know how to solve it.
