New CLAAS Combine?

[Bossfarmer]

Not entirely sure on that but we have a Lexion 650 and I know a trion 650 is identical at 350hp but Cummins not merc

Wat about a lexion 7500? How does it compare

 

[fudge]

Wat about a lexion 7500? How does it compare

I don’t know but I look forward to reading about your experiences over the coming seasons. In theory the larger diameter drum should stand you in good stead.

 

[Fergieman]

Wat about a lexion 7500? How does it compare

Lexion 7500 is a different machine to the 750. Lexion 7500 has 462hp Trion 750 has 435hp.

 

[tr250]

Wat about a lexion 7500? How does it compare

That would be way bigger capacity than our 650 and a fair piece bigger than the 750 I would of thought. I have had one on demo I didn’t really want to see the combine I asked for a convio header but our Lexion apparently won’t run one so I couldn’t see if the Draper header would make our own Combine quicker. But the 7500 flew in comparison to what I was used to and I didn’t know it well enough to get the best out of it either

 

[KB6930]

Wat about a lexion 7500? How does it compare

We had a 7500 on demo with a 9m against our 750 on a 7.5m header and it was a tiny bit quicker but not by much and there were definitely losses over the back where there wasn't anything from ours. I wasn't driving so just going by what I was told I'd think the trion should be a very good replacement for a 750 lexion

 

[Matt L]

We had a 7500 on demo with a 9m against our 750 on a 7.5m header and it was a tiny bit quicker but not by much and there were definitely losses over the back where there wasn't anything from ours. I wasn't driving so just going by what I was told I'd think the trion should be a very good replacement for a 750 lexion

If he was doing the same speed as you with a 9m cutter at then there is 20% more output just there. If there were losses while using the automatics on the combine it would have been a case of the sensitivities not being set properly to give the same result as your current machine.

 

[wellingtonfarmer]

Trion in Oats apparently very nice. And we should buy one.View attachment 981870View attachment 981871

Is that a 30ft convio header? I have enquired about one and been told they can’t take 30ft convio headers only 25ft convio or 30ft standard heaDer

 

[Fergieman]

Is that a 30ft convio header? I have enquired about one and been told they can’t take 30ft convio headers only 25ft convio or 30ft standard heaDer

Yes, been told the same.

 

[Matt L]

 

[wellingtonfarmer]

Yes, been told the same.

Just watching on YouTube the demo Montana trion has a30ft convio??

 

[Fergieman]

View attachment 1009720

Montana models. Standard can have the larger widths.

 

[Fergieman]

Just watching on YouTube the demo Montana trion has a30ft convio??

Yes, the demo we had was with a 30' convio.

 

[Flatlander]

Hutterite colony next to me run drapers and when conditions are dry an auger head will feed almost as well thrashing is better with a Draper as the crop feeds in the way it should not tangled up. At night when my auger head starts to wrap the crop around the auger they are still going strong. A fair bit heavier and more maintance. Are the ones available in the uk flex heads

 

[Lowland1]

Is that a 30ft convio header? I have enquired about one and been told they can’t take 30ft convio headers only 25ft convio or 30ft standard heaDer

I think it was a 30 foot header but it was a Montana. I’d ask my son ‘the Claas expert’ except he’s on hunger strike as I’m looking at buying a small New Holland.