New Holland 9 pin to Focus 2 7 pin?

[rx115]

Hi all, new to the forum. forgive me if this has been posted or talked about prior to posting, have looked at some threads regarding a focus 2 monitor and a 9 pin, but never made any sense of it all.

So we have a 2016 New Holland T7.200 with the breakaway socket at the rear and we are wanting to use a VB2160 with a focus 2 monitor, we have had them into older tractors using an "adapter harness" as I call it, which runs off the battery and includes the breakaway socket and a 7 pin "T"'s out of a box of sorts which goes into the back of the Focus 2 monitor, but we would like to save bringing all those cables into the cab and I was wondering whether it would work the same going from the 9 pin socket on the right hand rear pillar to a 7 pin which goes into the monitor, and if it would work, what cable do I need? I seemed to have scoured the internet to an inch of it's life but can't find a straight answer to the question, any help would be appreciated.

Tractor isn't at home at the minute so i'll use photos i've found on previous threads if that's not against the rules for now and i'll update with my own when its back in the yard, TIA.

 

[Lofty1984]

That 9 pin is an isobus socket well it is on mf anyway

 

[rx115]

That 9 pin is an isobus socket well it is on mf anyway

Yes, I believe so, am just wondering whether there is a 9pin to 7 pin cable that goes into the back of the Focus2

 

[Lofty1984]

I may be wrong but think it only for a lead from the implement to display/ use the tractor screen for control rather than a control box

 

[Lofty1984]

We’ve got a claas rake I was hoping to use through the tractor screen rather than having to put the control box in and out of different tractors but having trouble finding the right plugs

 

[Corncart]

Yes, I believe so, am just wondering whether there is a 9pin to 7 pin cable that goes into the back of the Focus2

Did you have any luck with this? Got the same problem on new Massey and Kuhn quantron screen

 

[Northern farmer]

Did you have any luck with this? Got the same problem on new Massey and Kuhn quantron screen

Which implement are you trying to control? The tractor screen is intended to run a virtual terminal for isobus implements.

 

[Corncart]

Which implement are you trying to control? The tractor screen is intended to run a virtual terminal for isobus implements.

Fert spreader - have asked dealer and an adaptor is being supplied to sort it. Thanks for response

 

[Lofty1984]

We couldn’t get it to connect to our spinner on a mf

 

[Lofty1984]

Fert spreader - have asked dealer and an adaptor is being supplied to sort it. Thanks for response

Could you let me know what the dealer supplies please

 

[Northern farmer]

I would also like to see more about this cable, perhaps when it arrives. Interesting if a plain adapter cable (no isobus converter box in-between, those exist) connects a non-isobus implement to be controlled from the tractor screen. Which tractor socket does the cable go?