New Holland auto command experience

[ED.D]

Does auto command us a separate oil supply like Fendt, valtra and deutz or does it have a combined transmission/ hydraulic reservoir?

 

[stevedave]

Combined transmission and hydraulic.

 

[ED.D]

Thanks for that, same as claas cmatic then.
Seems a perfect scenario for contamination followed by drive failure?

 

[stevedave]

On my second one now and no problems yet filtration is good on them. Only thing we find is the oil reserve is a bit small.

 

[Funny Farmer]

My Autocommand used to go straight into forward or reverse now it's started taking two or three attempts, when it's not going in just get a big N on the dot matrix and a chime - any ideas before I get the dealer out?

 

[Pheasant Surprise]

My Autocommand used to go straight into forward or reverse now it's started taking two or three attempts, when it's not going in just get a big N on the dot matrix and a chime - any ideas before I get the dealer out?

Possibly requires a transmission calibration, as per Vario 'boxes. One of the NH lads can advise how that's done on an AutoCommand or if it requires a dealer laptop or can be done via tractor screen.

 

[Mc115reed]

To calibrate... tractor will rev up to different stages once it starts calibrating.... hard to explain in words really though.....

 

[Funny Farmer]

Problem with sticking in neutral disappeared for a while , now back with a vengeance - any clues guys?

Ps tried starting with plus and minus buttons and it did go into some mode but didn't make a jot of difference

 

[blaser]

Had the same on puma, it was solenoid under the cab.

 

[andreleandro]

Hello. Here i got a T7.210 AC. I wanna try to do calibration by myself. Ours technician is getting old, and the relarionship betwen some employes is bad, that technician is a retired NH employee.
He does not wnat to teach this, i had seen manual but cannot find the way to calibrate this. Is there any video soo we can share and learn?

 

[d williams]

View attachment 493098

To calibrate... tractor will rev up to different stages once it starts calibrating.... hard to explain in words really though.....

Works best when hot

 

[Laurentiu]

Hello guy, i hava a AC t7060 and it s jumps out of gear and an error 12145 comes up.
I want to calibrate it, anyone manage to calibrate yet? Can someone tell me how to please?

 

[Laurentiu]

View attachment 493098

To calibrate... tractor will rev up to different stages once it starts calibrating.... hard to explain in words really though.....

What do you mean about ,,@,, hold??? Where i find this button?

 

[cosmagedon]

It's a problem with the electric hand brake

 

[Mc115reed]

It's a problem with the electric hand brake View attachment 914598

Electric hand brake on new Holland’s want a block of C4 attaching too them and blowing up

 

[daveydiesel1]

Electric hand brake on new Holland’s want a block of C4 attaching too them and blowing up

I think its just everythin from the engine that wants blowin up

 

[Laurentiu]

Thank you, i think i remember when i bought the tractor i calibrate the EPL and for a while it doesn t do problems,
i will calibrate again the EPL

 

[Laurentiu]

Anyway, if i want to calibrate the transmission too, how can i calibrate it?