New Holland Intelliview 4 Monitor 47932860 PRO 700

[MSW]

.rgbgsfgegfew

 

[MSW]

Can anyone advise to a work around to this serial number check ?

This Monitor has error BL001 No Valid User Software installed See Dealer . I have EST and have loaded many Software before, but this one will not show up on T7 CAN network to put into capture mode or to the part where you can download required files onto USB to use . I have repaired Montior using FRED so it is now ready for the software to be loaded . I tried to get the files using another T7 but get serial error when insert USB "see above image" anyone got ideas ? I have gone through linux files on USB to see if i could change the serial in script but most is encrypted .

 

[Spanner_Man]

Age? Model? What CAN connector? How is your EST set? Genuine or hacked off EST?

 

[MSW]

2016 -intelliview 4 p/n 47932860 - 26 pin connector that goes into the intelliview monitors on New Holland. Genuine EST . Set ? it works perfect on 100 CNH machines ive used it on . i have updated another intelliview 2 days ago so laptop side all good .

 

[Spanner_Man]

So you work for a dealer then? When I say set do you use the tractor or iso components? Primary or secondary can connection? The screen will not show as online without software in it. Once set up for programming it will show as online. This has to be done every time for every screen or you get the error as in your photo. Silly really as many of the displays are the same

 

[MSW]

Hi Spanner_man thanks for taking time to reply. However I am past the basics . correct it wont show as online but should show as connected to put into capture mode , have done this before. This unit is not being seen on the CAN Network. The screen shoot is my attempt to load with USB using another monitor that was in capture mode. if anyone knows how to put into capture not using the Tractor CAN or where in Linux Files the Serial is written from Boot USB I can pass this step .

 

[Spanner_Man]

No if BL001 is shown on the screen then won't show as anything until captured for programming. I too am also passed the basics. In the mean time put the screen in a different machine and try again