New Holland T7 automatic handbrake

[frederick]

When mowing last week our T7 210 threw up a stop error. Turns out the hanbrake temp sensor must have gone registering 100 degrees. Been fine rest of the week on trailers and tanking.
Cant replace sensor. New handbrake unit £1572 plus fitting
Any suggestions quite fancy getting my hands on a second hand one from a breaker but cant find any.

All advice welcomed

 

[del_boy]

When mowing last week our T7 210 threw up a stop error. Turns out the hanbrake temp sensor must have gone registering 100 degrees. Been fine rest of the week on trailers and tanking.
Cant replace sensor. New handbrake unit £1572 plus fitting
Any suggestions quite fancy getting my hands on a second hand one from a breaker but cant find any.

All advice welcomed

We've replaced a few handbrake packs, its not an easy job. The wear is often minimal but the cable stretches throwing it out of calibration. We've calibrated the handbrake pads with success aswell so try that 1st. I believe there was an update which fixed our last one, it gives the sensors alot more scope before it throws up an error code.

 

[frederick]

We've replaced a few handbrake packs, its not an easy job. The wear is often minimal but the cable stretches throwing it out of calibration. We've calibrated the handbrake pads with success aswell so try that 1st. I believe there was an update which fixed our last one, it gives the sensors alot more scope before it throws up an error code.

Thanks but were those error codes temp related or wear and callibration

 

[del_boy]

Thanks but were those error codes temp related or wear and callibration

Im not sure, possibly not temperature related. Ive helped to do 2 handbrake packs on a swb and lwb and dont recall seeing a sensor on the packs themselves so cant see why you need to change them if its only a sensor