Howdy team, I have a niggly little problem that I can't seem to figure out.
I bought a used amazone fertiliser spreader with the amados spread rate control which requires a tractor speed input to work.
I get the correct cable and plug it in and I get no 'pulses' registered.
I get the amazone dealer to check it out, they plug into a Claas tractor and it's working fine.
So I test my t7's 7 pin plug output and I am indeed getting a variable frequency output dependant on speed.
The pins are in the correct spot too and it won't work if I swap to the radar pin either.
So I'm stumped why the amados box can't pick it up. Is the signal weak or something?
Has anyone encountered a problem picking up a speed signal out of their tractors 7pin plug to an implement control unit and did they find a fix?
I can obviously get an external sensor setup on the driveshaft etc, but that seems a bit silly when I have supposedly modern tractor.
Any help would be much appreciated
I bought a used amazone fertiliser spreader with the amados spread rate control which requires a tractor speed input to work.
I get the correct cable and plug it in and I get no 'pulses' registered.
I get the amazone dealer to check it out, they plug into a Claas tractor and it's working fine.
So I test my t7's 7 pin plug output and I am indeed getting a variable frequency output dependant on speed.
The pins are in the correct spot too and it won't work if I swap to the radar pin either.
So I'm stumped why the amados box can't pick it up. Is the signal weak or something?
Has anyone encountered a problem picking up a speed signal out of their tractors 7pin plug to an implement control unit and did they find a fix?
I can obviously get an external sensor setup on the driveshaft etc, but that seems a bit silly when I have supposedly modern tractor.
Any help would be much appreciated