New Holland Tm 175/190 mechanical injector pump conversion

I've changed my tractor so I wont get a chance to use this now, I've been gathering the parts for a while as a back up.

The kit is everything I'm aware of that needs changing. Its cost a lot to gather everything over time and its still cheaper than a new electronic injection pump for one!

£1250 for everything in the photos
2015-11-20 14.40.03.jpg
2015-11-20 14.40.07.jpg
2015-11-20 14.40.10.jpg
2015-11-20 14.40.13.jpg
2015-11-20 14.40.17.jpg
2015-11-20 14.40.25.jpg
 

cosmagedon

Member
Location
North Wales
That's what I was hoping, that it would drive more like the short wheel base Tm's. Our Tm 155 is awesome to drive.

The other advantages would be reliability and savings in fuel.
 

cosmagedon

Member
Location
North Wales
That's what I found with my 175, you had to rev it when pulling from junctions to be smooth. The engines are similar to the small wheel base Tm's so with the mechanical pump it should be as responsive and as good on fuel. We had a 200bhp Tm155 and it was lovely to drive as well as being brilliant on fuel.
 

Sparky270

Member
Location
Lathus st remy
That's what I found with my 175, you had to rev it when pulling from junctions to be smooth. The engines are similar to the small wheel base Tm's so with the mechanical pump it should be as responsive and as good on fuel. We had a 200bhp Tm155 and it was lovely to drive as well as being brilliant on fuel.
have you had many problems with your electronic pump ?
 

cosmagedon

Member
Location
North Wales
Not with the pump, but I had a loose pin in a multiplug under the cab that I thought was the pump at the time. That's when I started gathering all these as a backup.
 

Snoodle568

New Member
Ik its been a while but what is needed for the trans to work with out the vp30? Do i just put a mecanical pump and send it away or will the computer say no?
 

cosmagedon

Member
Location
North Wales
It should just work as a normal power shift box, I'm unsure if the auto function will work though. I didn't get any interest in this so we're currently fitting it to our tm190.
 

Takudzwa

Member
I've changed my tractor so I wont get a chance to use this now, I've been gathering the parts for a while as a back up.

The kit is everything I'm aware of that needs changing. Its cost a lot to gather everything over time and its still cheaper than a new electronic injection pump for one!

£1250 for everything in the photos
View attachment 241860 View attachment 241868 View attachment 241872 View attachment 241876 View attachment 241878 View attachment 241884
Is this still available
 

Takudzwa

Member
I've changed my tractor so I wont get a chance to use this now, I've been gathering the parts for a while as a back up.

The kit is everything I'm aware of that needs changing. Its cost a lot to gather everything over time and its still cheaper than a new electronic injection pump for one!

£1250 for everything in the photos
View attachment 241860 View attachment 241868 View attachment 241872 View attachment 241876 View attachment 241878 View attachment 241884
Is it still available
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.2%
  • Up to 25%

    Votes: 65 34.8%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,290
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top