I've not had to do it on this one yet it last got done at the dealers when it had a new potentiometer fitted cheersI know you have to knock the split pins out of the link arms to allow the top arms to go through the motions, cant remember the actual buttons etc that need to be pressed I'm afraid, been 15yrs since I had a TM
Just Googled it and this came upI've not had to do it on this one yet it last got done at the dealers when it had a new potentiometer fitted cheers
Excellent thankyou I'll give that a goJust Googled it and this came up
tm rear lift calibration?
Need to calibrate the rear lift on a tm 150 , how is it donewww.forum4farming.com
Cheers thankyouTo make it calibrate you need to force it into HH mode, by unplugging the potentiometer on the lift arms.
Beyond that I can't remember off the top of my head.
But definitely disconnect the lift arms.
What's happened is common on mine, it loses its calibration, then resets itself with the lift rods being the top limit, so not lifting high enough.