New Holland Turbo

gwspark

Member
Hi i have an 8160 turboed lad that i no ho had it before me had it on a dyno and its 160 hp on shaft 7000 hrs and still ok
Did you want pictures
I could take em but never put em on forum might need help
Let me no what you want pics of

Pics of where oil feed and return come from on block would be great if you could possibly get them for me. [emoji4]
 

Drillman

Member
Mixed Farmer
Pics of where oil feed and return come from on block would be great if you could possibly get them for me. [emoji4]
IMG_0446.JPG

IMG_0447.JPG

image.jpg


Pics taken from a TM135 but pretty sure the layout will be much the same on the 60 series.
 

Attachments

  • image.jpg
    image.jpg
    417.8 KB · Views: 30

norse

Member
Location
yorkshire
Yes without doubt and when your set up and you need a boost for the pump I have one but you might be ok with out it
I think you will be fine without the boost system for the pump,this was fitted to stop the over fuelling when at low revs with little boost on turbo which resulted in a bit of smoke at low revs (emissions regs!) I had a 7840 fitted with turbo that smoked a little,about 125 hp and a 8240 that I had a turbo fitted to that was 128 hp at the pto making it about 145 at engine,this never smoked at all and was sold with 9500 hrs,that was a fantastic tractor and I think you would acheive a similar result with your 8260,best of luck!
 

gwspark

Member
I think you will be fine without the boost system for the pump,this was fitted to stop the over fuelling when at low revs with little boost on turbo which resulted in a bit of smoke at low revs (emissions regs!) I had a 7840 fitted with turbo that smoked a little,about 125 hp and a 8240 that I had a turbo fitted to that was 128 hp at the pto making it about 145 at engine,this never smoked at all and was sold with 9500 hrs,that was a fantastic tractor and I think you would acheive a similar result with your 8260,best of luck!

Thanks, I like the sound of that. I'm sort of looking for around 125hp at shaft. Don't think I'm asking too much.
 

Latest Poll on TFF

  • Yes

    Votes: 23 15.4%
  • No

    Votes: 126 84.6%

JCB launches Fastrac ‘iCon’

  • 194
  • 0
Written by Charlotte Cunningham from CPM Magazine

JCB has launched new Fastrac 4000 and 8000 Series tractors with an all-new electronics infrastructure which is claimed to deliver higher levels of performance. According to JCB, the new Fastrac iCon operator environment has three key features: iConfigure – creating a bespoke control experience for every operator iConnect – integrating advanced precision agriculture technology iControl – redefining operation through new driveline software The 175hp to 348hp (133kW to 260kW) Fastracs feature the new iCon armrest console and touch-screen display to provide flexibility in operator allocation and operator information, as well as a new transmission control strategy to enhance operator comfort and powertrain efficiency, says the manufacturer...
Top