New Slurry tower prices and advice

[Fraserb]

Can you pm me a number for him thanks

Will do tomorrow

 

[Jd Everytime]

Does any of the umbilical draw off pipes go in to the store and draw out of a sump, like a 600mm deep concrete ring in the floor so it draw out right empty?

 

[Fraserb]

Does any of the umbilical draw off pipes go in to the store and draw out of a sump, like a 600mm deep concrete ring in the floor so it draw out right empty?

Our new one has a 200mm pipe running into the centre which drops down into a sump.

 

[ollie989898]

Our new one has a 200mm pipe running into the centre which drops down into a sump.

Thats what you want. Straight from the store not from the reception pit!

 

[Fraserb]

Thats what you want. Straight from the store not from the reception pit!

We only have a reception pit on one tower and thats just for filling it, rest have 150mm outlets and this one a 200mm

 

[Jd Everytime]

Plastic pipe inside store? 200mm pipe on to 6" valves or bigger valves too?

 

[Fraserb]

Plastic pipe inside store? 200mm pipe on to 6" valves or bigger valves too?

Its stainless pipe into the middle and 8" valves this time. Can't see why plastic wouldn't work though

 

[MickMoor]

Done all this.

Original pipes been in 21 years and never been any bother, not sure what pressure will be in the pipes.

 

[MickMoor]

I never knew that stuff was rated to pump slurry down under any pressure!

It is not rated for pressure at all. In fact I have known the spiral reinforced suction hose, rated at 2 bar, burst with the pressure from a slurry pump. Had to get these made specially.
But what do I know?

 

[jd6230]

https://www.moore-concrete.com/agriculture/above-ground-slurry-store/stephen-kennedy/

This is our store. Finished ground level is top of the reception tank so might be nearer 2m of fill on the left hand side.

Is it big enough Stephen?