New toy day

Finn farmer

Member
Which has best resale value, Deutz or Claas?
Can't say for sure. Deutz has been underground from 2005 to 2019 since there really wasn't reputable dealer for them. When Claas replaced Deere the old Claas seller brought Deutz back. But the few that are being sold with ~1000h on them seem to hold their value better than Claas.
 

Tomr10

Member
Christened her
IMG20210925162013.jpg
 

Tomr10

Member
Is it a circular saw version?
How are you finding it?
I am considering one myself.
It may be a bit early, but what sort of output
Yes circular version. Not bad, makes short work twisted wood ain't to bad. Biggest problem the 4 way splitter can get jammed with smaller stuff so dropped it down to 2 way split and it was much better
 

Finn farmer

Member
Yes circular version. Not bad, makes short work twisted wood ain't to bad. Biggest problem the 4 way splitter can get jammed with smaller stuff so dropped it down to 2 way split and it was much better
No matter the size of the machine (small "table" machine or tractor powered) the 4 way splitter is kinda hit&miss. Would be lovely if it worked like it was intended.
 

Old Tup

Member
Several years ago I looked at vario tractors. A vario claas was more expensive than the equivalent fendt. Nice cab interior though
So did CLAAS use the Fendt MF Vario backend as they used to do with the old manual version?
MF plant at Beauvias….Gear box factory stuck out the end….boxes came across a small covered road into the end of the MF Plant, a small proportion of the boxes were diverted for Claas builds.
Good while ago .
Meanwhile further up the plant German built Fendt Vario boxes were arriving to fit to the MF line.
 

Speedstar

Member
Location
Scottish Borders
So did CLAAS use the Fendt MF Vario backend as they used to do with the old manual version?
MF plant at Beauvias….Gear box factory stuck out the end….boxes came across a small covered road into the end of the MF Plant, a small proportion of the boxes were diverted for Claas builds.
Good while ago .
Meanwhile further up the plant German built Fendt Vario boxes were arriving to fit to the MF line.
No claas make there own box now they used to use the ZF one
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 75 43.6%
  • Up to 25%

    Votes: 61 35.5%
  • 25-50%

    Votes: 27 15.7%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 3 1.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,283
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top