NH TS135a linkage

[Gruffalo]

Our 2004 TSa regularly need the link arms calibrating, which works every time but it seems to go into disable too often. Have fitted a new potentiometer but it hasn’t cured it. Seems better if we use the slide to lift and lower rather than the switch but I’m not sure that definitely the answer. Anyone had similar problems ?
Cheers

 

[nelson]

it may be the computer control side of it not holding its memory

 

[Jimbo]

We’ve had this too but it’s usually caused by starting tractor and not giving it a second or two before hitting the rear lift button .

 

[Gruffalo]

Ours is happening when in work. Only use the switch for lifting for set heights and drops. Use slide 90% of the time

 

[Jimbo]

That rules that out then

 

[daveydiesel1]

Ours is happening when in work. Only use the switch for lifting for set heights and drops. Use slide 90% of the time

You not try puttin new button on or are they expensive

 

[Gruffalo]

Haven’t done yet, wondered about taking armrest to David King