Non drip tin/cladding

[ballybollen]

Is it any good

 

[SimonB]

Hi,

Yes it is good what you will be using the building for to have this spec'd on?

Kind Regards

Brett Harris
01270 781158 Extn 1018.

 

[dubs]

we have it on two sheds, ones the old feed store and the fleece, the anti drip lining, goes right to the end of the sheet and seems to hold the water in the last 4 inches or so but the workshop roof the lining is 5 or so inches short from the bottom and the water drips off without going back up the sheet.
I do worry about the longevity of the sheets on the feed store roof so just make sure the fleece doesn't go all the way to the end

 

[J428TGS]

we had our workshop done with the fleece backed sheet it only lasted 10yr rusted out, the shed was air tight no ventilation to dry the back, our sheeps house is been done for 9 yr now and theres not a mark of rust near it, the bottoms of the sheets are open and lot of air movement to dry them out