Nordsten 3000 series drill

[Somerset Farmer]

I need a set of coulter arms for the above drill and have no luck in finding any. Has anyone got a good used set or new set for sale. Could buy a complete drill if has good coulters . TIA

 

[spin cycle]

@carbonfibre farmer

 

[carbonfibre farmer]

I assume when you say coulter arms, you have a Suffolk coulter type drill rather than the spring tine type?

 

[Somerset Farmer]

I assume when you say coulter arms, you have a Suffolk coulter type drill rather than the spring tine type?

This is a piggy back drill for power harrow mounting with long coulter arms with the suffolk coulters attached and they did not make tyne type coulters for this drill. The coulters are welded to the arms but they have a replacable point.Thankyou

 

[carbonfibre farmer]

This is a piggy back drill for power harrow mounting with long coulter arms with the suffolk coulters attached and they did not make tyne type coulters for this drill. The coulters are welded to the arms but they have a replacable point.Thankyou

Occasionally I see them on Facebook market place or eBay. Not seen any you want, at a sale, for a while either I'm afraid.
I'll keep my eyes out. I generally get "tagged" by all and sundry when a Nordsten drill comes up for sale

 

[robbie]

Is it a ns3030???? My cousin has one piggy backed into a drillmate. He has just got a set of new Coulter boots for his from pan Anglia. They are weld on so it's a bit of work but not too bad, cut the old bit off and weld the new one onto the arm.

The tin on the sides has worn away, I assume yours has done the same, it's had them replaces before and has lasted a several sets of tips.

 

[Somerset Farmer]

Is it a ns3030???? My cousin has one piggy backed into a drillmate. He has just got a set of new Coulter boots for his from pan Anglia. They are weld on so it's a bit of work but not too bad, cut the old bit off and weld the new one onto the arm.

The tin on the sides has worn away, I assume yours has done the same, it's had them replaces before and has lasted a several sets of tips.

Thankyou i will try ringing tomorrrow but their website does not show the parts.

 

[robbie]

D

Thankyou i will try ringing tomorrrow but their website does not show the parts.

Definitely worth a call, there was a long wait for them. Cousin ordered them back in August to arrive in sept but his only arrived last week, they have to come from konskilde in Denmark and hinges are moving slow over there apparently.

 

[glasshouse]

I need a set of coulter arms for the above drill and have no luck in finding any. Has anyone got a good used set or new set for sale. Could buy a complete drill if has good coulters . TIA

If u were nearer
What are they worth?