cosmiccrofter
Member
- Location
- Morayshire
Not according to the brochures I have, 600 x 19 was not an option, even with 36" rears.
Oliver tractors
- Thread starter multi power
- Start date
Not according to the brochures I have, 600 x 19 was not an option, even with 36" rears.
multi power
Member
- Location
- pembrokeshire
So what size should they be ?
cosmiccrofter
Member
- Location
- Morayshire
They should be 600 x 16 see below:
multi power
Member
- Location
- pembrokeshire
600 16 for a high clearance tractor, they have a different front axle, mine is standard clearance
To be honest I'm finding it all a bit confusing, I had thought mine hi clear but serial number says standard
cosmiccrofter
Member
- Location
- Morayshire
A lot of people simply fitted 36" rears to the standard tractor for extra road speed, that might solve your dilemma.
multi power
Member
- Location
- pembrokeshire
That's what I assumed when I bought it, but I'm sure 36s were an option, I used to drive a 165 that had 36s and 19s and they were definitely original
As for speed mine does 25 mph
cosmiccrofter
Member
- Location
- Morayshire
Yes 19's were an option on the 165.
- Location
- Sorn Ayrshire
The high clearance 65 did have a different front axle just longer swivels on cosmiccrofter,s leaflet the difference shows up on the ground clearance under the front axle between the 2 mines on 750s and 14x30s 
multi power
Member
- Location
- pembrokeshire
Yours looks well on the wide back wheelsThe high clearance 65 did have a different front axle just longer swivels on cosmiccrofter,s leaflet the difference shows up on the ground clearance under the front axle between the 2 mines on 750s and 14x30s