Opico air 8 ground wheel drive

Irishkiwi

Member
Livestock Farmer
Hi there new to this forum would appreciate any assistance.
I have recently purchased a used opico air 8 tine harrow.
Issues with the consistency of the seed roller revolutions even with no seed in the box.
Have taken out the roller and cleaned ect and reassembled. When you turn the ground wheel the roller will not turn at a consistent ratio.
The cable seems to be turning fine in the drive assembly.
Took off the drive belt all looks in order and reassembled.
Could the issue be in the gearbox/drive mechanism that the cable goes in to at the hopper end.
Thanks in
 

agcon1

Member
Location
derbyshire
Hi there new to this forum would appreciate any assistance.
I have recently purchased a used opico air 8 tine harrow.
Issues with the consistency of the seed roller revolutions even with no seed in the box.
Have taken out the roller and cleaned ect and reassembled. When you turn the ground wheel the roller will not turn at a consistent ratio.
The cable seems to be turning fine in the drive assembly.
Took off the drive belt all looks in order and reassembled.
Could the issue be in the gearbox/drive mechanism that the cable goes in to at the hopper end.
Thanks in
had this with ours....its the variable speed gearbox thats worn....get ready tho, there over a grand from opico...cant remember the name of them now but there American made i think...google the name and you can get one from elsewhere but was still about 600 quid if memory serves me right
 

Irishkiwi

Member
Livestock Farmer
Thanks for that .
Is there any maintenance /overhaul that can be done on this variable speed box have not taken it off so don't know if it can be taken apart.
Based here in South Island nz so access to these type of parts can be an issue asthese machines and not popular over here
 
Ours has been a bit irregular for as long as I can remember. Seems to move in jumps rather than one continuous motion. It did get a new gearbox at one time and, as above, it was a fortune.

One thing we did was drill and tap the end of the roller shaft then bolted a big washer to it and hammered the end over. That way you've got a little flag going round that will alert you if it packs up completely half way up the field.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.3%
  • Up to 25%

    Votes: 62 34.8%
  • 25-50%

    Votes: 29 16.3%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.2%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top