Osr seeder rig, cousins v-form based,liquid fert etc

7 leg osr seeder with liquid fert.
Made by ourselves approx 5-6 years ago, very well done , can be split down to use as a subsoiler in 2 hours max.
Cousins 7 leg v-form 3.25m
Metcalfe low disturbance legs
Chafer QuickStart liquid fert system variable rate with speed via gps, rds box, to rear dribble bars.
Horstine osr seeder again variable rate with rds box (similar to stocks I believe).
Autocast unit for slug pellets off back or companion crops.
Simba dd lite packer
Accord drill bar with disc coulters , 2 per leg to drill either side of leg.
Rear accord Harrow bar.
Original crumbler bar.
7 original cousins legs
All works well , I’ve used this every year for the past 5-6 years and it’s been perfect establishment, but the flea beetle have made it pretty hard now, was doing up to 300 acres a year with it.
Did 70 acres this year and went well, metcalfe legs are very good with minimal disturbance.
Disc coulters are serviceable but every year we repair a few ready for season but spares easy to get, I was considering replacing with weaving bolt on disc coulters but these work fine enough.
Will split and keep some bits back if I do but it deserves to be sold as a whole thing as it works so well and cost a lot of money and time to build one like this .
£7500 all in with box of new metcalfe tungsten wearing metal.
Pm me for details or ask away here.
IMG_1387.JPG
IMG_1388.JPG
IMG_1389.JPG
IMG_1391.JPG
IMG_1395.JPG
 

spikeislander

Member
Location
bedfordshire
Mods I know this is in wrong place but it won’t let me advertise on the correct one?
I’ve got a few other bits could you possibly move it or unlock me to post on private machinery to sell ?
Regards Damian
 

Shutesy

Moderator
Moderator
Mods I know this is in wrong place but it won’t let me advertise on the correct one?
I’ve got a few other bits could you possibly move it or unlock me to post on private machinery to sell ?
Regards Damian
Not to sure why you cant post in the private machinery section. @Chris F might be able to help. For now I'll move this across. If you want to post your other bits I'll move them across as well.
 

spikeislander

Member
Location
bedfordshire
Sorry not at this point as I think they make the machine.
If I end up splitting it I may but my initial thoughts are to keep them and buy a new folding v form frame only and put them in .
If it changes I’ll let you know sorry
 

Will you help clear snow?

  • yes

    Votes: 68 32.4%
  • no

    Votes: 142 67.6%

The London Palladium event “BPR Seminar”

  • 7,953
  • 118
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top