Part ID - Source

[Ukjay]

Hello,

Could anyone please advise what the cap I have highlighted on the TEF20 Cav Pump Governor section is called please (it's held on with two srews), as I am working on the old girl to get it going during other jobs, currently I have the pump off to service it and change the diaphram, filters, gaskets etc, and clean all the crap out of it.

The old diaphram was found to be split, but the little cap which the linkage goes through has a lot of wear on either the housing or the cross shaft, so I want to either replace that cap to get it back to how it should be - or I will have to get the shaft or housing sleeved to prevent any air leakage affecting the correct damper operation.

Does anyone know if that shaft is available to purchase?

 

[Ukjay]

OK, so I take it noone knows what the part is called, so anyone know a good vintage massey tractor specialist I could approach - as all I can see is parts sellers who do not stock this part?

 

[tomlad]

My instinct is get yours machined , sleaved

 

[Ukjay]

My instinct is get yours machined , sleaved

It appears that may be the only option here, as I have contacted several vintage parts dealers and nada.. Not a part they can get.

Bloody flat head screws are siezed as well and as it is alloy, I don't really want to be hitting it if the part is obsolete.

 

[tomlad]

Gentle tappy tap tap on handle of good fitting screwdriver

 

[Ukjay]

Gentle tappy tap tap on handle of good fitting screwdriver

That's part of the plan.

 

[Netherfield]

I think this chap is an old school diesel man. Advertises in the Classic Commercial magazine.

S J Wilkinson
Blundellbrook Farm
Preston
PR3 2JB
01772 784330

 

[Ukjay]

I think this chap is an old school diesel man. Advertises in the Classic Commercial magazine.

S J Wilkinson
Blundellbrook Farm
Preston
PR3 2JB
01772 784330

Many thank Netherfield, I will see what can be done ?