parts needed

[Inneedof]

I have a 1988 3630 Massey Ferguson tractor. My clutch slave cylinder is leaking and I have to bleed it . I tried to get a cylinder kit but was told they are obsolete. If anybody knows of away to find one I would greatly appreciate it. I am in Manitoba Canada

 

[john432]

First thing one needs is the correct Massey Ferguson part number. Some models the parts diagram can be found online with a bit of searching. Is that age of tractor on Agco.parts?

 

[startinghandle]

You say the cylinder kit is obsolete but can you get complete slave cylinder?

 

[Inneedof]

First thing one needs is the correct Massey Ferguson part number. Some models the parts diagram can be found online with a bit of searching. Is that age of tractor on Agco.parts?

I have a part # 3387108m92 but was told it is no longer available

 

[masseybreaker]

First thing one needs is the correct Massey Ferguson part number. Some models the parts diagram can be found online with a bit of searching. Is that age of tractor on Agco.parts?

qtp part number 6300 usually does it john

 

[How much]

This one says its compatible and fits loads of other stuff as well a 3630 to so you may be able to pick one up locally of another model

https://www.mkhmachinery.com/produc...ferguson-2000-3000-6000-8000-series-tractors/

 

[Netherfield]

If you are really stuck:-

Are there any classic truck groups in Canada, in a magazine I have there is an advert for a firm who will resleeve cylinders which will not reseal, usually in stainless steel and can then supply seal kits to suit.
www.classic-parts.co.uk

 

[john432]

qtp part number 6300 usually does it john

Yes that's probably the correct seal kit, about £100 from QTP OE Part no 3600267M93,
When one searches @Inneedof 's part no 3387108M92, it came up on some Polish part web sites , with about a dozen different part numbers,including the QTP OE part no. See below.
My suggestion would be for the OP , to Google the part numbers, and see if something turned up in north America, otherwise they could be bought in Poland for some £50.

 

[john432]

This one says its compatible and fits loads of other stuff as well a 3630 to so you may be able to pick one up locally of another model

https://www.mkhmachinery.com/produc...ferguson-2000-3000-6000-8000-series-tractors/

Got a feeling that that kit is for the master cylinder ,next to the pedal,and not the slave cylinder kit.

 

[norse]

We once took the cylinder off a mf 3125 to the Thorne hydraulics who we hse for rams , the mf dealer told us that the cylinder was scored and would need completely replacing and previously replaced seals had failed, they honed / polished is,put in new seals as they said that the mf ones were low friction ones and not very good,that tractor went away several years later without any further problem, so try a ram repair shop!

 

[How much]

Got a feeling that that kit is for the master cylinder ,next to the pedal,and not the slave cylinder kit.

I would call the supplier , there often seems to be issues with photos of parts being either generic or incorrect but you would assume if they are actually selling a "slave cylinder seal kit" in the listing and delivering a master cylinder seal kit they would very quickly realize that when they got returned and rectify the listing