Pattern Exhausts

[Andrew]

Anyone know a company that makes tractor exhausts? After one for an MF8480, dealer wants a fortune.

 

[Richy12]

Try GT exhausts, he will make anything and cheap...

 

[Andrew]

Try GT exhausts, he will make anything and cheap...

I've tried them. Got as far as giving me the prices, tried to order and he's not replying.

 

[Richy12]

Keep trying fella, they do alot of gear

 

[Cowabunga]

Anyone know a company that makes tractor exhausts? After one for an MF8480, dealer wants a fortune.

Do you actually need the upright pipe or just the bend at the bottom. Don't know about the 8400 series but lesser tractors tend to rot the lower bend just where it enters the base of the silencer. With patience you can get the broken bit of bend pipe out of the silencer and just replace the upright/silencer on top of a new bendy bit.

Not sure whether this is relevant to your model or circumstance, but it might help someone save a bit of money.

 

[mtx.jag]

https://www.facebook.com/CliffJenkinsAgriServices/

Had full system from this guy,fitted spot on and would recommend

 

[michael N123]

Local wagon spot will proberly make a straight threw pipe cheap if you don’t mind noise

Some people love them I hate them personally

 

[tinman]

I've tried them. Got as far as giving me the prices, tried to order and he's not replying.

that could be a blessing in disguise.

 

[robo]

Anyone know a company that makes tractor exhausts? After one for an MF8480, dealer wants a fortune.

firm in northampton made one for us afew years ago we were quoted 1200 from SDF they made just the same for about 300 will see if ican find the name

 

[john432]

Bought 89mm stainless steel pipes and the 90 degree bend from a company called Jettex (online) all came to around £160 . The bottom bend needed cutting and shortening , need to take off and weld in the venturi pipe for the air cleaner. Also fit a stainless silencer which will cost around a £120 , too noisy as it is.

 

[bill and bens dad]

Bought 89mm stainless steel pipes and the 90 degree bend from a company called Jettex (online) all came to around £160 . The bottom bend needed cutting and shortening , need to take off and weld in the venturi pipe for the air cleaner. Also fit a stainless silencer which will cost around a £120 , too noisy as it is.

when my exhaust went on 6480 local firm made a stainless pipe up,it fitted fine,but as you say bit noisy as in standard exhaust tractor is quiet,plus im to old to be a boy racer lol, have pipe for sale !!

 

[deleted user 837354]

I dont understand why you would want a louder than normal exhaust on a tractor. Will make you ill in time im sure.

 

[john432]

I had to do a quick fix initially as it was blowing on to the battery's! Will fit a silencer soon, yes it's too noisey as it is! so all in for around £300 plus a bit of welding isnt too bad

 

[Hesstondriver]

+1 for straight through stainless (YOLO)

 

[michael N123]

I dont understand why you would want a louder than normal exhaust on a tractor. Will make you ill in time im sure.

I sat in a friends fastrac with silly stainless exhaust and it was hellish

Maybe a bit fun when your on the road going on and off the throttle... but in a field with the hand throttle set to constant noise for a 12 hour day it must be horrendous

 

[michael N123]

+1 for straight through stainless (YOLO)

Do a few 10-12 hour days and a straight threw stainless would get ripped back off

 

[Andrew]

+1 for straight through stainless (YOLO)

Not sure I’d fancy that revving flat out on a baler all day.

 

[Hesston4860s]

Think there’s a firm somewhere in Lincoln makes custom exhausts.

 

[Chuckie]

JP exhausts at Congleton make a nice job in stainless if you give them one to copy

https://www.jpexhausts.co.uk/

 

[ACEngineering]

these guys make a lot of the aftermarket exhausts for assorts.

https://www.mulmuf.com/industrial-off-road/tractors/