Perkins 3152 help

[Jet123-2007]

Hi everyone first Time poster
I have a old tow behind pressure washer fitted with what I believe to be
A Perkins 3152 3 cylinder diesel non turbo with a Lucas diesel pump
I think it’s very similar to the engine in
A mf 135 tractor I am in the process of
Fixing it up got it running but the wiring loom is a mess I can get a loom
Online for a mf 135 but I don’t know if it will work for me can anyone help me identify the engine model and give me some advice or where to get a manual thanks in advance for any help I have included some pictures

 

[agrimax]

Hi Jet,afraid there's nothing in your pictures to identify the engine,but if it's a 3 cyl perkins I'd think it's a AD3.152 alright.(could also be an A3.152...which is indirect injection like in a MF35)
The engine number should be stamped on the block above the starter,beside the lift pump(behind the glass bowl if fitted).Starts with something like 152UA...

 

[Jet123-2007]

Hi agrimax thanks for taking the time to reply
To my question I will have a look and take
Some more pictures I am a novice with Perkins but I want to save this machine has been well made and not full of electronics like the new ones

 

[TripleSix]

You don't need to buy a loom.
It'll only have about 3 wires?

 

[Exfarmer]

Has it got an alternator or a dynamo? Whichever will be very simple to wire, and as Triplesix states there is no need to buy a loom. In fact most of these looms sold as fitiing xxx actually fit a wide range of tractors, and none

 

[Mursal]

Alternator will be best, if you intend to use it

 

[Vizslaman]

If your not happy doing the wiring yourself AUTOSPARKS supply a number of looms for all kinds of vehicles and equipment or will make you one.

 

[Jet123-2007]

Hi thanks for the advice everyone my engine
Has the alternator fitted I would make a loom
If I had a diagram your correct it is very simple
Any more help greatly appreciated

 

[Exfarmer]

Hope this makes sense

 

[Jet123-2007]

Hi exfarmer thanks so much for taking the time to reply and draw the diagram just what I needed I will do exactly what you have said and report back

 

[Jet123-2007]

Hi everyone I know it’s been a long time since I asked for help but life COVID and my family and bills keep getting in the way but I thought it would be the correct thing to do a update for the people that took the time to help me out I have got the engine running really well so far I have had a brand new starter motor fully reconditioned the radiator new battery replaced a few bits of fuel lines and with the help of Exfarmers diagram I have made a temporary loom that works well most people will think I am mad for spending time and money on a old thing like this but I disagree a Perkins engine driving a huge cat pump I could not dream of buying it new so the next things to get done are
Oil oil filter air filter fuel filter new alternator and belt also needs tyres and some hydraulic hose fittings and other bits and bobs and a good paint and tidy up I will post some pictures when done thanks again for the help