Pickhill Bantam arc welder for sale: Bury (North Manchester/Lancashire)

Dear All,
IMG_20240809_151214.jpg
IMG_20240809_151219.jpg
IMG_20240809_151223.jpg
IMG_20240807_174438.jpg
IMG_20240713_175053.jpg
IMG_20240713_175059 (1).jpg


I'm hoping I'm in the right place, as I've joined TFF just for this one post.

My father was a retired smallholder from East Sussex, who lived in Bury, Lancashire (North Manchester) for the last 35 years. He passed away last year and I've been clearing his home. There have been several surprises. What we could we've sold or taken to Gisburn Auction, or given away locally.

One of the last things we uncovered is a Pickhill Bantam arc welder.

So far as I know Dad acquired it in the early 1980s when the owner died. It certainly hasn't been used since 1988 when he moved to Bury.

We've been able to open the body of it, and the two electrical engineers who did so have discussed its condition and decided it was "clean and in good nick". They were pleased with the oil that came off it - a slightly odd smell, but otherwise clean and apparently not contaminated. We pumped out the oil to reduce weight, and it's in 3x 5litre oil canisters. The original electrical cabling was not safe for modern use, and has been cut off, so that needs replacing, although we've retained it for now. The end of one welding cable has no terminus, but we found a box of 749.5 welding rods, which I assume go with it. The other end has a giant crocodile clip on it.

The 749.5 welding rods (yes, I counted them) seem to be in fair condition, and are in at least 3 different thicknesses. My brother advised me that they may need a little drying out in an oven since they've been in store since 1988. I'm not qualified to do that, whoever takes it may have the pleasure.

We'll accept a reasonable offer.

Everything that was part of it is still available and mostly usable. We are selling it for either a renovation project or spares. I'll try to upload photos below, but they are available on request to " tuftysfamily at gmail.com " if I am not successful.

I'm not familiar with the protocols of this forum, but enquiry or response can always be made to " tuftysfamily at gmail.com ".

My parents ran approximately 1.5 acres of smallholding in Battle, East Sussex, for nearly 20 years between about 1972 to 1988. We started with rabbit meat farming, then moved into goats, with our peak being some 80 milking goats: the Whitcher Herd of Browsers and Grazers, and the bulk of our milk sold to Safeways Supermarket, plus some local trade in milk, cheese and yoghourts. Dad was an engineer by trade before farming, and after retiring took up radio hamming, working with his Drummond B lathe, and other interests.

Thank you all, and my Lord Jesus bless you and yours.

:) MrsGC
 

MrsGC

Member
The cable was removed by an electrical engineer. He's offered to put it back on if you'd like to come over and try it before you buy for the price it's worth with the original cable on 🙂

Do you have an offer on the price of the welding rods on their own? 😊
 

MrsGC

Member
Thank you all for your advice :) I'll speak to my family and see what they say. We had been able to find an oil reclamation company who were willing to collect the oil as part of their usual round in the area, so that isn't a problem; the local council tip didn't want to have it.

THE ARC WELDER IS NOW WITHDRAWN FROM OFFER ON THIS WEBSITE.
 

oilcan

Member
Thank you all for your advice :) I'll speak to my family and see what they say. We had been able to find an oil reclamation company who were willing to collect the oil as part of their usual round in the area, so that isn't a problem; the local council tip didn't want to have it.

THE ARC WELDER IS NOW WITHDRAWN FROM OFFER ON THIS WEBSITE.
👍
 

Wellytrack

Member
Thank you all for your advice :) I'll speak to my family and see what they say. We had been able to find an oil reclamation company who were willing to collect the oil as part of their usual round in the area, so that isn't a problem; the local council tip didn't want to have it.

THE ARC WELDER IS NOW WITHDRAWN FROM OFFER ON THIS WEBSITE.

2E234E00-4ACB-4776-BC47-447E21C57E00.jpeg
 

Banana Bar

Member
Arable Farmer
Location
Bury St Edmunds
Dear All,
IMG_20240809_151214.jpg
IMG_20240809_151219.jpg
IMG_20240809_151223.jpg
IMG_20240807_174438.jpg
IMG_20240713_175053.jpg
IMG_20240713_175059 (1).jpg


I'm hoping I'm in the right place, as I've joined TFF just for this one post.

My father was a retired smallholder from East Sussex, who lived in Bury, Lancashire (North Manchester) for the last 35 years. He passed away last year and I've been clearing his home. There have been several surprises. What we could we've sold or taken to Gisburn Auction, or given away locally.

One of the last things we uncovered is a Pickhill Bantam arc welder.

So far as I know Dad acquired it in the early 1980s when the owner died. It certainly hasn't been used since 1988 when he moved to Bury.

We've been able to open the body of it, and the two electrical engineers who did so have discussed its condition and decided it was "clean and in good nick". They were pleased with the oil that came off it - a slightly odd smell, but otherwise clean and apparently not contaminated. We pumped out the oil to reduce weight, and it's in 3x 5litre oil canisters. The original electrical cabling was not safe for modern use, and has been cut off, so that needs replacing, although we've retained it for now. The end of one welding cable has no terminus, but we found a box of 749.5 welding rods, which I assume go with it. The other end has a giant crocodile clip on it.

The 749.5 welding rods (yes, I counted them) seem to be in fair condition, and are in at least 3 different thicknesses. My brother advised me that they may need a little drying out in an oven since they've been in store since 1988. I'm not qualified to do that, whoever takes it may have the pleasure.

We'll accept a reasonable offer.

Everything that was part of it is still available and mostly usable. We are selling it for either a renovation project or spares. I'll try to upload photos below, but they are available on request to " tuftysfamily at gmail.com " if I am not successful.

I'm not familiar with the protocols of this forum, but enquiry or response can always be made to " tuftysfamily at gmail.com ".

My parents ran approximately 1.5 acres of smallholding in Battle, East Sussex, for nearly 20 years between about 1972 to 1988. We started with rabbit meat farming, then moved into goats, with our peak being some 80 milking goats: the Whitcher Herd of Browsers and Grazers, and the bulk of our milk sold to Safeways Supermarket, plus some local trade in milk, cheese and yoghourts. Dad was an engineer by trade before farming, and after retiring took up radio hamming, working with his Drummond B lathe, and other interests.

Thank you all, and my Lord Jesus bless you and yours.

:) MrsGC
I was told that the oil in welders and transformers is extremely carcinogenic, just after I’d been up to my elbows repairing one years ago! They are worth buga all.

BB
 

Will you help clear snow?

  • yes

    Votes: 68 32.1%
  • no

    Votes: 144 67.9%

The London Palladium event “BPR Seminar”

  • 9,453
  • 123
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top