Plastic stripping attachment for handler

[glasshouse]

For silage bsles
Are these any good

 

[cows sh#t me to tears]

Yes

 

[glasshouse]

Yes

Who makes it

 

[cows sh#t me to tears]

Tanco.
Although I only use mine for removing net wrap as we tube wrap silage bales. Works well for mixer wagon.

 

[cows sh#t me to tears]

Also use it with a bit of tweak age, to load square bales safety
Plus it has a false bucket for loose commodities

 

[Grass And Grain]

Also use it with a bit of tweak age, to load square bales safety
Plus it has a false bucket for loose commodities

Could you provide link for type of machine?

 

[Grass And Grain]

One of these?

Anyone any idea if you can hit a ring feeder with the silage using one of these (we use the small youngstock rings).

 

[cows sh#t me to tears]

One of these?

Anyone any idea if you can hit a ring feeder with the silage using one of these (we use the small youngstock rings).

Yes.

 

[cows sh#t me to tears]

I do 4'6" bales so I found it better to replace the tines with longer ones to hold the bottom of the bale a bit better and not have it fall out from under you. And if netwrap only, you have to be careful to only grip the bale enough so as to not cut right through the net before you get to where your slicing.
Works better with a baler with knives in as well.
False bucket is brilliant if using a mixer wagon too. Had mine for 14 years I think.

 

[Nithsdale]

Keltec do one too which works the other way (shear plate goes up instead of coming down on the Tanco)... depends what you're doing as to which will suit best

 

[Pan mixer]

I can fill a 5 foot sheep feeder with mine although some of the silage sticks out over the top.

8 foot cattle rings easy but you need plenty of height over it especially if you are using un-chopped bales.

Would buy another that day if my Tanco was not available.