Plough Frog protectors

sh40

Member
Notice the frogs are wearing down at the back above the landslide on my Overum cx plough. After doing a bit of research online there is frog protectors which can be put on.

Are these the correct ones in the link below. Also they only give the ones for the right hand side. Is there a different one for the left hand side?

Do these then just bolt onto the landslide?
 

Bury the Trash

Member
Mixed Farmer
Those in the link are landsides.

Keep landsides in good wearing order and the frog etc shouldnt wear other than maybe shine up a bit.

Yours will be XL bodies I would think, so order wearing parts accordingly.
 

Bury the Trash

Member
Mixed Farmer
Or some old worn parts like cut in half landsides welded on with a couple of beads along the top of the frog, should hold them in place, it's not great draft forces there.
 

RLC

Member
Location
North Yorkshire
i got local engineers to plasma me some for dowdeswell out of hardox. Took a cardboard template and they were spot on. Not to mention 1/3 price of genuine.!(y)
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.1%
  • Up to 25%

    Votes: 67 35.3%
  • 25-50%

    Votes: 30 15.8%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,294
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top