Plough metal

[Mr chips]

Our Lemken plough is ready for new boards. Genuine is twice the price of non genuine. Your thoughts please on value for money.

 

[bobk]

You/ve answered the question

 

[john432]

Try half genuine , and half copy boards. Only way to find out.

 

[welger]

we only use genuine besson wear parts.far better than spaldings and their not much more money

 

[Happy]

Spaldings rep once told me they get it from Lemken. Not sure if that will be right or not but seems to last well enough to me.

Used to use genuine plough metal but since switching to a Lemken power harrow where very expensive genuine is only show in town have to make savings elsewhere

 

[chaffcutter]

All this wearing metal is now on Farm Marketplace, worth a look as the prices are really good.

Lots more stuff been added this week, full catalogue of engineering bits and pieces as well.

 

[bobk]

All this wearing metal is now on Farm Marketplace, worth a look as the prices are really good.

Lots more stuff been added this week, full catalogue of engineering bits and pieces as well.

Put a link up then ....

 

[Rowland]

Easy change stuff if they last 1/2 to 3/4 as well as genuine parts and are cheaper than genuine parts not a problem. But moleboards
Down time to change better off getting genuine parts.
That’s just ones opinion

 

[chaffcutter]

Just touch the button in the top right hand corner.....

 

[bobk]

Just touch the button in the top right hand corner.....

The weather button .

 

[bobk]

Get these for 6 squid .

https://www.marketplace.farm/farm-m...well-ucn-body-for-dowdeswell-147298-s.127508/

 

[Flat 10]

Get these for 6 squid .

https://www.marketplace.farm/farm-m...well-ucn-body-for-dowdeswell-147298-s.127508/

Less than that here with fixings

 

[Muck Spreader]

Get the welder out

 

[bobk]

Get the welder out

ffs cost more in sticks than new boards

 

[seedman stains]

Was that the plough you were on about the otherweek!!!!!!!!!!!

 

[Muck Spreader]

Was that the plough you were on about the otherweek!!!!!!!!!!!

Definitely not, I bought a Duro 3f mechanical non stop from a friend.

 

[michael N123]

Get the welder out

It would be better selling it with the 2 boards removed for buyer to replace rather than that codge!

 

[Al R]

Our Lemken plough is ready for new boards. Genuine is twice the price of non genuine. Your thoughts please on value for money.

What size plough and what width furrows etc?
I used to have a 5f KV ploughing at 20”. The first and fourth wore the quickest (4th was always following the tractor wheel) I only used to use genuine but if i’d Have wanted to cheapen the job i’d Have kept the 2 fasted wearing ones genuine and the other non genuine.

 

[Mr chips]

What size plough and what width furrows etc?
I used to have a 5f KV ploughing at 20”. The first and fourth wore the quickest (4th was always following the tractor wheel) I only used to use genuine but if i’d Have wanted to cheapen the job i’d Have kept the 2 fasted wearing ones genuine and the other non genuine.

Six furrow at 14in . Mainly ploughing deep for potatoes. We find non genuine is a mixed bag from batch to batch. If it was consistent it would be ok.

 

[jpd]

genuine only



ther;ll be money after you when you re dead