Ploughing with 710tyres

[Manitou mania]

Evening any recommendations for best plough or mouldboards that suit a 710 tyre currently have a lemken slatted plough

 

[jh.]

I have an overum xl. One tractor on 710s and another on 650s . I can actually get it making a better job on the 710s as they have a narrower track . The 650s are out at 80" so the outside walls are out further than the 710s at 74".

I have also used a couple of KV ploughs on number 28s and they are without a doubt a better plough for the 710s

 

[KB6930]

Kv no30 slatted is better again than a kv no28 board. I have both and the slats hide the 710 better

 

[nick...]

LB boards on a kuhn will accommodate 710 tyres
nick...

 

[TripleSix]

Ploughing with a Kuhn here on 710's, matches up no issue

 

[Al R]

Used to have a kv eg85/300 on no28’s on some serious cross hills that would cover 710’s lovely, never had a bad day with it

 

[Battlefield Machinery]

Kv 28,s , 38’s are the things, here’s a video I did a few years ago of 800’s in furrow, the 800’s did need a furrow widener on ! But 710’s are doable on the right land, if your on strong land you do need a bit of speed to throw it over to be perfect....

 

[jh.]

If your on strong land it's 20.8s you need .

 

[Lincs Lass]

If your on strong land it's 20.8s you need .

Had 20.8x38 on an mf 6190,,ploughed hundreds of acres every year in 14 inch furrows,,slats on a kuhn master 140,,it always covered in on either light sand of heavy carr land

 

[Andy12345]

If I have to use our smaller 5 furrow KV on 28 boards in furrow can get it to match up fine on 710s. Surprisingly if I have to drop in furrow with the LO 7 furrow on No 8s it still matches ok except on the really heavy clay bits!