Pre- stressed concrete wall panels

[Ruston3w]

Hello, just looking at doing some work with nos concrete panels, either 95mm or 150mm thick are there, has anyone priced any panels recently to guide me please?
Richard.

 

[Hilly]

Hello, just looking at doing some work with nos concrete panels, either 95mm or 150mm thick are there, has anyone priced any panels recently to guide me please?
Richard.

Only guide I will give you use 150mm 95mm are bad for breaking .

 

[farmgineer]

150mm x 15', had 28 I think? In spring, £230 a piece plus vat and transport if I remember correctly.

 

[Doing it for the kids]

Depends what is for.

95 no good for grain!

 

[robs1]

The unbrako "100" ones we bought last time are nearer 105

 

[Hilly]

The unbrako "100" ones we bought last time are nearer 105

The ones I bought were bent as well lol

 

[robs1]

The ones I bought were bent as well lol

Ours were very good to be fair, all one off specials to use as stable partitions, would buy again

 

[Hilly]

Ours were very good to be fair, all one off specials to use as stable partitions, would buy again

I have had straights ones off them as well…. Mosty straight but …

 

[Wesley]

I have had straights ones off them as well…. Mosty straight but …

Its all down to how/where they’re stacked & position of bearers while they’re still green.

 

[Hilly]

Its all down to how/where they’re stacked & position of bearers while they’re still green.

Yes they must fuk that up now and again .

 

[devonbeef]

it is amazing how much they warp. i could not believe how much one of mine i put up recently had bent being concrete, probably my fault for bad storing untill fitting, i did not think before it would do that, still went up and be fine,but interesting

 

[PSQ]

150mm x 15', had 28 I think? In spring, £230 a piece plus vat and transport if I remember correctly.

Metre high or 1.5?

Knowing what height they were would help with calculating a ‘metre square’ price.

 

[devonbeef]

Only guide I will give you use 150mm 95mm are bad for breaking .

never broken a 100mm one yet in cattle sheds at 15 ft saying that today might be the day as cleaning out

 

[Doing it for the kids]

From memory 150mm was around £50/m2 last time we had a few loads

 

[farmgineer]

Metre high or 1.5?

Knowing what height they were would help with calculating a ‘metre square’ price.

1 meter

 

[PSQ]

1 meter

£50.30/m2

 

[Ruston3w]

Thanks for the replies, they are in an online auction near here, guessing mostly not straight enough for the job intended. I only want them for a single run forklift proof wall round our packing shed. Not sure what demand there will be for 150 lots of various sizes, thickness and quantities. Will watch with interest .
They are just down the road from here but when I priced some 3years ago it was cheaper to buy from NI and pay shipping than buy in Suffolk.....

 

[carbonfibre farmer]

Thanks for the replies, they are in an online auction near here, guessing mostly not straight enough for the job intended. I only want them for a single run forklift proof wall round our packing shed. Not sure what demand there will be for 150 lots of various sizes, thickness and quantities. Will watch with interest .
They are just down the road from here but when I priced some 3years ago it was cheaper to buy from NI and pay shipping than buy in Suffolk.....

If it's the sale I think it is, looked quite a few lots. Plenty of gravel boards etc too!
Getting them home would kill the job for me unless they were particularly cheap.

 

[Ruston3w]

Starting price for 145mm is around or even over £50m2......dear if you're having to make things fit around the lengths they have.....I'll find some other distraction.