Pto wide angle joint rattle

[davidroberts30]

What causes them to start rattling?not real bad but enough to wear the guard
Both Uj's are fine with no play
Both Uj's seem to be meshing together properly
Shaft is straight and slides easy

 

[Pistonbroke]

Bought a used baler from riverlea and it was like that,shaking itself to pieces. Both tubes had a bend but they were equal so still slid easily. Walloped them with a rubber fencing mallet until straight and silent now

 

[livestock 1]

It’s the CV joint inside that’s worn. There was some cheap ones about didn’t last five minutes. Change it ASAP as that rattle/vibration goes up the shaft and causes indigestion inside your tractor