As the title suggests I'm after a v belt pulley that will ideally fit direct onto a 6 spline male pto shaft.
I've a drain jetter that I rarely use below 1000rpm. Meaning unimog revving its cock off supping diesel when there's no need. I have an input shaft with pillow block bearings and a large pulley available just need a v pulley approx 5" diameter that will slot straight onto jetter pto input shaft so mog makes 1000rpm at tickover....
Is such a thing available off the shelf or is it a manufacturing job?
Cheers rob
I've a drain jetter that I rarely use below 1000rpm. Meaning unimog revving its cock off supping diesel when there's no need. I have an input shaft with pillow block bearings and a large pulley available just need a v pulley approx 5" diameter that will slot straight onto jetter pto input shaft so mog makes 1000rpm at tickover....
Is such a thing available off the shelf or is it a manufacturing job?
Cheers rob