exmoor dave
Member
- Location
- exmoor, uk
No, think garden, but not gardening.
The shaft off the wifes rotary washing line
No, think garden, but not gardening.
Rubbish plastic greenhouse?No, think garden, but not gardening.
Fancy making another one of those..?Might as well drop a little more 3D printing in this thread.
The rubber on the gear stick seems to be disintegrating and high and low buttons feel out. This creation was a fairly quick fix, taking less than an hour to unscrew, design, print and screw back together. That was about 18 moths ago while having a drink and switching seed in the drill. Trimmed out the remains of the old buttons and printed a couple of elliptical top hats which just sit in place. Only had to pull it apart today as some of the original rubber was gumming up the down shift top hat. I just looked and a new part is listed at ÂŁ76.73 so I doubt these buttons are getting a proper replacement any time soon.
View attachment 1016953
View attachment 1016954
would bale string not have done?Stalk for mirrors was moving freely, bolt wouldn't tighten or slacken , so wedged a nut and bolt in the gap and cable tied it down now no play and mirror stays in positionView attachment 1017355View attachment 1017356
I wonder if the gas bottles are kept in there?Not mine but came across it on the Interwebs.
View attachment 1017619
very miner compaired to some having a lot of bad luckBeen hole patching..
View attachment 1017715
And servicing fastrac... this came out of front axle... not sure how the water got in, breather hose is still ok.View attachment 1017716
Bit of damage assessment.... nothing much hanger snapped on shed door and a few dead elms down in lane.
View attachment 1017717
View attachment 1017718
Have you booked the mot?