Quickie Topgrip Bale Grab

[Jerry]

Anyone using the above? Need another over the top bake grab for rounds and squares.

Seems a better design thank the Slewtic I currently have.

 

[Bullring]

Anyone using the above? Need another over the top bake grab for rounds and squares.

Seems a better design thank the Slewtic I currently have.

Yea I have one, get on great with it, easy to adjust between rounds, 4 and 6 string squares. Sure Halse would do you a good deal. Far prefer it to the McHale grab I have as well.

 

[Dog Bowl]

Yeh I have the Albutt version which I think is the same. It's a fantastic grab and so easy to adjust between bale sizes. Would recommend

 

[Jerry]

Yea I have one, get on great with it, easy to adjust between rounds, 4 and 6 string squares. Sure Halse would do you a good deal. Far prefer it to the McHale grab I have as well.

I got a price of them yesterday at the show.

 

[Tractorboy67]

I’ve a browns one done thousands of bales . Been a very good grab

 

[Jerry]

Phoned up Halse’s at 10 this morning to order one. Dropped of at 2 this afternoon and out straight to work.

As always Halse top notch service.

 

[Bullring]

Phoned up Halse’s at 10 this morning to order one. Dropped of at 2 this afternoon and out straight to work.

As always Halse top notch service.

Can’t fault that, top dealers to deal with. invoice will be in the post by tomorrow. Pleased with it?

 

[Jerry]

Can’t fault that, top dealers to deal with. invoice will be in the post by tomorrow. Pleased with it?

Invoice was in email before delivery

Yes. Moved about 80 bales this afternoon. Very easy to use and no plastic snagged even in heavy 4 layer wrap bales.

certainly holds bales better than my other grab which will now be relegated to unloading at the stack.

 

[Poorbuthappy]

Invoice was in email before delivery

Yes. Moved about 80 bales this afternoon. Very easy to use and no plastic snagged even in heavy 4 layer wrap bales.

certainly holds bales better than my other grab which will now be relegated to unloading at the stack.

What type/make is your old 1?

 

[Jerry]

What type/make is your old 1?

Slewtic, same as this one:

Slewtic Bale Grab - Graham Holland Ltd

hollandagriculturalservices.co.uk

 

[paul&mandy]

Phoned up Halse’s at 10 this morning to order one. Dropped of at 2 this afternoon and out straight to work.

As always Halse top notch service.

How do you find it for getting off the bottom bales on the trailer fitting between the bale ends if that makes sense. Or do you just leave a gap?
We have various ones with the rollers but struggle to pick the top single layer off.

 

[Jerry]

How do you find it for getting off the bottom bales on the trailer fitting between the bale ends if that makes sense. Or do you just leave a gap?
We have various ones with the rollers but struggle to pick the top single layer off.

I left a small gap previously but with this one as the arm floats it seems to find its way down between the bales very well.

You v=can also use the top bar to pull the bale back towards you to slip the end bar in:

This video shows it quite well