Ransome TS59 cross shaft advice required.

[Jimbolewis]

Hi All. I have replaced a broken u bolt on the cross shaft of my TS59 and can't remember what position the adjustment arm was on the cross shaft before I removed it. If I leave the cross shaft with the right hand (viewed from the front) side pin up and the adjustment handle in the middle would that be correct? Hope that makes sense to someone.

 

[tomlad]

Photo be good
Which u bolt

 

[wuddy]

Hi All. I have replaced a broken u bolt on the cross shaft of my TS59 and can't remember what position the adjustment arm was on the cross shaft before I removed it. If I leave the cross shaft with the right hand (viewed from the front) side pin up and the adjustment handle in the middle would that be correct? Hope that makes sense to someone.

Yes shouldn’t be far away at that, sitting in seat, right hand pin should be between 5 and six o’clock with adjustment handle in middle.

 

[Jimbolewis]

Photo be good
Which u bolt

Sorry but I won't be able to get a photo until the weekend. It's the u bolt that holds the adjustment arm onto the cross shaft.

 

[Jimbolewis]

Yes shouldn’t be far away at that, sitting in seat, right hand pin should be between 5 and six o’clock with adjustment handle in middle.View attachment 989579

Thanks......that's very helpful.

 

[tomlad]

Sorry but I won't be able to get a photo until the weekend. It's the u bolt that holds the adjustment arm onto the cross shaft.

No problem, id read it as a u bolt like on a fergie plough, understand now