Ransome TS59 Plough Points.

[Bury the Trash]

41’s are shallower than 39’s and are the better of the two for match work. I wore out a pair of 41’s that dad originally used and replaced them with idcp7. Definitely better at 10” for match work in the vintage class! Pop a picture up and I’ll can tell you what you have! Steel points and shares plough a lot nicer but are very hard to find now!

bit of a wire brushing and was visible on the back of the middle board

 

[wuddy]

bit of a wire brushing and was visible on the back of the middle board
View attachment 994259

That’s the better of the two epic boards, have attached a picture of mine at 10”!

 

[Pennine Ploughing]

That’s the better of the two epic boards, have attached a picture of mine at 10”!View attachment 994490

What about these

 

[wuddy]

View attachment 994507

What about these

That’s what’s on my epic bodies now, they are actually the steel boards meant for irdcp bodies which were originally cast mouldboards! They are almost the same shape as the 41’s but the rear lower edge from memory is about 1” closer to the ground!

 

[Pennine Ploughing]

That’s what’s on my epic bodies now, they are actually the steel boards meant for irdcp bodies which were originally cast mouldboards! They are almost the same shape as the 41’s but the rear lower edge from memory is about 1” closer to the ground!

Aye that confirms what I thought and what a couple of others have said.
I have a pair of complete bodies and had them a few years, not sure what I will do with them yet

 

[wuddy]

Aye that confirms what I thought and what a couple of others have said.
I have a pair of complete bodies and had them a few years, not sure what I will do with them yet

They go well just no competition for yl’s on openings finishes and firmness but I’m glad I learnt to plough with them as they are far more forgiving than yl’s!

 

[Fergie Ploughman]

I found Epics to be the work of the devil! My plough had them when I originally got it, couldn't wait to get rid of the frickin' things. Sold them for good money at the time, including the frogs they pretty much paid for the repro YL's I started with...