Ransome YL 183 bolts

Good evening,

Would any of you know where I would be able to source some of these single knib bolts for the front of the board on a genuine YL 183 Kristeel mouldboard? Also what size should they be?
1633368904926.jpeg
 

Tonym

Member
Location
Shropshire
In cases like this make your own bolts to fit. Take a ordinary bolt that fits the hole and heat the head cherry red and hammer it into the hole to shape it. Tighten it up then grind off the excess. Perfect fit in your worn hole.
I used this method to make square headed bolts to fit the shares on a B12 plough I had.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 42.9%
  • Up to 25%

    Votes: 63 34.6%
  • 25-50%

    Votes: 30 16.5%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 5 2.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top