Ransomes Disc Harrow Bearing

[NiallM]

Bit of a long shot but does anyone know where to I could get one of these bearings, I've broke the grease housing on this one.

 

[Lincs Lass]

Ni on impossible to find one ,must be 50years old .
Could you grind the bit of ,put a helicoil thread in and add screw a nipple into that

 

[YELROM]

Could you weld an M6 nut into the hole then put a grease nipple in that

 

[Nearly]

Westlake plough parts?

 

[Lincs Lass]

Could you weld an M6 nut into the hole then put a grease nipple in that

Can you weld mild steel onto cast

 

[YELROM]

Can you weld mild steel onto cast

I assume it will be a cast steel so I think it would weld good enough for a grease nipple

 

[NiallM]

Cleaned it off and tapped it, thanks for the suggestions

 

[nails]

Bit of a long shot but does anyone know where to I could get one of these bearings, I've broke the grease housing on this one.

You could try Westlake Ploughs.

 

[Barleymow]

Les Carter