Rapid box drill metering not even on base of drill

[fermec860]

As above when checking hopper the right hand side always has used a bit more

 

[Refco]

Settings the same? (Flaps and shutters).
Rats been munching on the seed rollers?

 

[fermec860]

Settings the same? (Flaps and shutters).
Rats been munching on the seed rollers?

No rats all settings the same

 

[Refco]

Have you tried doing a calibration, but do a few extra turns of the handle and then compare the weights of the left and right trays.
It seems an unusual problem, you have.

 

[fermec860]

Have you tried doing a calibration, but do a few extra turns of the handle and then compare the weights of the left and right trays.
It seems an unusual problem, you have.

It seems the middle is worse have never taken it apart before so will maybe have ago over winter

 

[agcon1]

its probably the agitator shaft that's winding it one way, bit like an auger effect

 

[simon-0116]

Had same problem. The spring flaps that cup the seed rollers here loose. Had to adjust tension on then. And a grub screw holding shaft had vibrated loose..

 

[fermec860]

Thanks I read the book and it said about the flap pressure will look at it when I get time which grub screw came loose