Rare Carraro 20.14 Problems

[95xpower]

i have a carraro axle 20.14 I changed seals and a drive shaft recently.. I have been told i have a rare axle which carraro didn't make many of.

My large oil seal size is coming up on the computer to be 130 160 14.5 but it was a 125 160 12mm came out of it.

Any parts place ive been talking to cant understand.

I have attached a viseo showing the difference, has any come across this?

 

[MF CI]

i have a carraro axle 20.14 I changed seals and a drive shaft recently.. I have been told i have a rare axle which carraro didn't make many of.

My large oil seal size is coming up on the computer to be 130 160 14.5 but it was a 125 160 12mm came out of it.

Any parts place ive been talking to cant understand.

I have attached a viseo showing the difference, has any come across this?

No idea if this is your problem but I have seen on newer tractors that use what is called a cassette seal when pulling off the wheel hub the seal comes apart leaving a wear ring on the inner stationary hub. It's only a mm or two thick and the sealing part you have taken off looks like a normal seal.

If you see what I mean.

 

[95xpower]

No idea if this is your problem but I have seen on newer tractors that use what is called a cassette seal when pulling off the wheel hub the seal comes apart leaving a wear ring on the inner stationary hub. It's only a mm or two thick and the sealing part you have taken off looks like a normal seal.

If you see what I mean.

Would you be able to send me picture to explain?

Ive attached a few of my own

 

[MF CI]

The only thing I could find. It's a long video but you only need to watch the first minute to see what I was on about.

mf 6200 replacing front hub seal - Google Search

It's copied the search page, scroll down that and you will find an Aussie working on a John Deere video.

 

[95xpower]

The only thing I could find. It's a long video but you only need to watch the first minute to see what I was on about.

mf 6200 replacing front hub seal - Google Search

It's copied the search page, scroll down that and you will find an Aussie working on a John Deere video.

Ahh yes i see what you mean..ill try and see is there one of them for this axle type