Raven Cruizer 2

ImHereForHelp

New Member
I need help with my Raven Cruzer 2. I want to plug in switch to manually control the toggle of the paint on the screen without so that I don't have to use the touch screen. I have a 9 pin plug that fits in the B socket (at the back of the monitor) but I don't know which pin should I apply my 12 volt current to. If anyone uses that, could you do a quick test with a multi-meter to help me out? I don't want to bust my GPS by putting voltage where I shouldn't.

Thanks!
 

ImHereForHelp

New Member
no, I read in the manual and it says you have to apply 12 to a pin and a ground to another when you want to pain, and cut the power supply to stop painting. It just doesn't say which pin.
 

rob h

Member
Location
east yorkshire
I have one you only need a 12v supply in for coverage ,I spliced a wire in to the power supply wire this goes to the switch then comes back to the cruzer to control it
 

rob h

Member
Location
east yorkshire
Hear you are mine is a ago cruiser but I think they will all be the same
20181008_100801.jpg
20181008_100742.jpg
20181008_100742.jpg
20181008_100742.jpg
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.2%
  • Up to 25%

    Votes: 65 34.8%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,289
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top