Re bushing Schaffer 5058 pivot steer

[The Grinch]

@ACEngineering. When replacing bushes on front end do the pins normally need replacing at the same time and also in your experience do all the pivots wear out at the same time as dad thinks there’s only 3 that need doing but don’t want to start replacing them and then find out we need to order all the others. Been quoted £58 per pin/bush and I think there’s about 11 Can you recommend anyone for bits ?

 

[ACEngineering]

@ACEngineering. When replacing bushes on front end do the pins normally need replacing at the same time and also in your experience do all the pivots wear out at the same time as dad thinks there’s only 3 that need doing but don’t want to start replacing them and then find out we need to order all the others. Been quoted £58 per pin/bush and I think there’s about 11 Can you recommend anyone for bits ?

I think most schaffer bushes are hardened steel type so yes they would wear the pins, but you not going to know unless you take it apart.

Sorry cant recommend anyone for parts really as i not been a schaffer dealer for a few years now.

These guys below have been schaffer dealers for many years, probably since they first came to UK? so be a good place to start.

Home - The Tractor Part Shop

www.thetractorpartshop.co.uk