Recommend me a mig welder please

[TheTallGuy]

Rust can be an issue on mig wire if used infrequently. Always store spare reels in a plastic bag. Of course damp is a big issue with spare rods, but are easier to move indoors.

My trick is to just put a cloth over the roll & that seems to do the job - except when I forget to remove it & it gets jammed into the rollers!

 

[Exfarmer]

Rods are easy enough to rebake, the duration of.. and temps are on the box usually or info is available online somewhere.

Only if the coating is still attached

 

[Bury the Trash]

Only if the coating is still attached

no fancy heaters to keep them in here, just the airing cupboard by the rayburn.
only take out doors when need to use, and then only take what i need , or there abouts. rarely wasted any ever, id however have a roll or 2 of rusted wire and a few ex use liners and contact tips and what a pita it is changing things / wire sizes etc for different uses and turning gas on and getting pressure just right ....