recommendations for a loader on a 3095

[J428TGS]

can any one recommend a good (neat) loader for a 3095 1.5t lift minimum

 

[Thomas5060]

New or 2nd hand?

 

[J428TGS]

either or, brackets valves and control are needed

 

[Will 1594]

970 quickie or 1790 trima Google gribbons tractors in northern ireland

 

[multi power]

Mf 885 i think if you want a classic

 

[REStracTORATION]

 

[J428TGS]

View attachment 494528

far tttooooo new for me

 

[REStracTORATION]

Quickie are nice well finished
Sigma are a strong loader with good lift capacity

 

[Thomas5060]

@Wellytrack has a sigma and likes it and it was cheap
Quicke Q46 or 56

 

[REStracTORATION]

far tttooooo new for me

 

[J428TGS]

View attachment 494530

hahahaha LAD

 

[REStracTORATION]

@Wellytrack has a sigma and likes it and it was cheap
Quicke Q46 or 56

They are well build and have a few ranges spec to choose from so there is a spec for nearly everyone and a price
Sigma im meaning

 

[J428TGS]

ive always been barnd on brand loader an tractor, even if its no da best, bur not any more time for a good un

 

[REStracTORATION]

Heres a few where you at????

 

[Juggler]

Quicke Q950 works for me

 

[DeeGee]

can any one recommend a good (neat) loader for a 3095 1.5t lift minimum

Don' t know your circumstances, or your reason for wanting a loader on a 3095. But have you considered a second hand Loadall such as a 525- 58 or similar from the 1990's? You can pick up a tidy machine for about 8k, or even something a bit tatty for perhaps six.
However, these may be more than you want to spend, and if so good luck with a second hand loader for the 3095.

 

[msheep66]

Would a 3095 be a bit cumbersome with a loader? I only ask as I am considering a 3095 myself. I was looking for a 3075 with loader but there doesn't seem to be many about.

 

[multi power]

Would a 3095 be a bit cumbersome with a loader? I only ask as I am considering a 3095 myself. I was looking for a 3075 with loader but there doesn't seem to be many about.

I would go for a six cylinder for loader every time, purely for stability, obviously not so handy in tight yards

 

[dannewhouse]

its not the answer you want but when I was looking for a loader for a 3120 the advise was don't!
spend money on a newer tractor with a power shuttle I bought a 6265 I know its 4cyl but you would not go wrong with a 6270 or similar. ... if you buy a tractor with a loader on its a lot cheaper than fitting one to your tractor.
if your 3095 is tidy would you get 7k for it? a loader might be 6/7k? you could probably get a tidy 6270 with loader for 15k?

I know its not the one you know but you would end up with a lot better outfit and a good bit newer

 

[msheep66]

its not the answer you want but when I was looking for a loader for a 3120 the advise was don't!
spend money on a newer tractor with a power shuttle I bought a 6265 I know its 4cyl but you would not go wrong with a 6270 or similar. ... if you buy a tractor with a loader on its a lot cheaper than fitting one to your tractor.
if your 3095 is tidy would you get 7k for it? a loader might be 6/7k? you could probably get a tidy 6270 with loader for 15k?

I know its not the one you know but you would end up with a lot better outfit and a good bit newer

Yes probably makes sense unless you could get a decent secondhand loader for about £3k