Reekie reliance 500 destoner problems

[Barry mullan]

Hi how’s it going I have a reekie reliance 500 destoner I bought last year used it last season an parked in shed after use Every thing was working perfact hooked it on today an she won’t do anything wen I move the joysticks on the control box the oil is flowing round an back to the tractor an the light is coming on in the control box in the cab so there power coming to the box Any1 ever had this before any help will be much appreciated thanks

 

[ridger]

There is a fuse in control box also mine doesn't work well until oil is well warmed up in tractor,

 

[JLLM]

Are the pipes on the wrong way round? Try listening for the solenoids working on the machine (clicking noise) with the engine off.
Just a thought, has someone speeded up the cross conveyor? it will rob all the oil even when switched off.

 

[Barry mullan]

There is a fuse in control box also mine doesn't work well until oil is well warmed up in tractor,

i changed the switch but I’ll try it again after ive worked the tractor for a while thanks

 

[Barry mullan]

H

Are the pipes on the wrong way round? Try listening for the solenoids working on the machine (clicking noise) with the engine off.
Just a thought, has someone speeded up the cross conveyor? it will rob all the oil even when switched off.

How would I make the solenoids work if the engine is off ?? I don’t think so because she worked all the functions back to front ( if I pressed share down she lifted it up Ect ect ) wen I tried it a few weeks ago but the pipes where on the right way it’s a strange 1

 

[RLC]

If not the fuse then check the earth wires next to the solenoids. Bit of a crude connector that held them all together on the one i used. cause me a fair bit of grief i seem to remember. Check all the pins on the plug into box too.

 

[ridger]

H


How would I make the solenoids work if the engine is off ?? I don’t think so because she worked all the functions back to front ( if I pressed share down she lifted it up Ect ect ) wen I tried it a few weeks ago but the pipes where on the right way it’s a strange 1

Engine off key on you hear them click

 

[ridger]

Power beyond or plugged into spools? Mine never went right til it was power beyond using the 3 pipes

 

[Barry mullan]

Power beyond or plugged into spools? Mine never went right til it was power beyond using the 3 pipes

Plugged into 2 spoils just it worked fine last year like that 1 on pump an 1 on float worked fine that’s why it’s wrecking my head

 

[JLLM]

Has it got the rod sticking out towards the cab to alter cross conveyor speed?

 

[Barry mullan]

Has it got the rod sticking out towards the cab to alter cross conveyor speed?

No cross conveyor is controlled from the cab on the control box

 

[KennyO]

Check all the pins in the multiplug on the control box. We had a similar issue on a older 350. One of the pins had been pushed back and wasn't connecting.
Does it have a switch next the spool bank for swapping to load sensing? If it has been knocked it might cause an issue.

 

[JLLM]

One other thing is the micro-switches in the box can stick which means that the spool stays open, its usually the steering or something visible but if its say the share down switch you might not notice.

 

[ridger]

My share goes down with a button and up with joystick thing

 

[ridger]

What kind tractor, on the fiat it needed a good rev to get it to lift up

 

[Barry mullan]

What kind tractor, on the fiat it needed a good rev to get it to lift up

yeah my share goes down with the button as well as the joy stick we have a ts 115 on it had plenty of revs on an all I’m beginning to think a mouse r a rat has chewed thru a wire somewhere I Gona have to give it a good looking thru I think

 

[4755dave]

Make sure cross conveyor speed isnt flat out or no flow. Seem to remember that the hydraulics slow as cc speed increases???