Replacement tine bar for muck grabs

[Scholsey]

Looking at repairing old Albutt muck/bale grab, is it possible to buy a big length of box with tine bushes already welded in?

 

[GmB]

Yes

 

[Fendt516profi]

Weld on Frames - Loader - Machinery Parts

Sparex - Your First Choice for tractor parts and accessories

gb.sparex.com

 

[Lazy Eric]

Spaldings used to do them, probably still do.

 

[solo]

Agrilinc worth a look

 

[Scholsey]

Sparex is only 80 x 80mm box, current grab is 100 x 100 doesn’t seem right to put a smaller one in, spaldings don’t stock them anymore,they used to have them made to order but were taking too long.

Think just need to speak to a friendly engineer and ask to plasma cut some 100 x 100 and weld the bushes in ourselves.

 

[Magnums'R'Us]

I know its a fair way from you but we had one made for a muck grab by Bainbridge Engineeering Near Thirsk Top class guys talk to Cyril 01845 597655 www.bainbridge-engineering.com He put an extra tine in as muck gets shorter due to folks using bedding machines
tell him what length you need and how many tines and what tine fitting

 

[dreambollocks]

Evans and Reid Neath nr. Swansea

 

[towbar]

You could mag drill them either just need to be sure you mark both sides accurately and test fit tine is square before welding

 

[Classichay]

You could mag drill them either just need to be sure you mark both sides accurately and test fit tine is square before welding

https://www.magdrill.com/rotabroach-accessories/rotabroach-extension-arbors.html

just drill one sided then the issue isn’t there